What versions of VMware Horizon does the PCoIP Zero Client Firmware support and is pre-certified with?
Support PCoIP firmware is supported with the publicly available Horizon release available at the time of the firmware release and is compatible with one major release of Horizon prior to this. Further information for each release can be found via their …
Knowledge Base Article Advisory Setup Third Party Enhancements Zero Clients
Last modified: March 13, 2024
20183
FAQ - PCoIP Performance (5398)
  FAQ – Performance Summary Network Requirements A well designed, tuned network should have the following characteristics: latency <= 250 ms Latency variation <= 30 ms Packet loss of <= 0.1%  Tuning Guidelines Details on how to design and tune your PCoIP …
Knowledge Base Article FAQ
Last modified: January 11, 2024
1750
What are the jumpers and LEDs on the Tera2 PCoIP Remote Workstation Card used for?
All external connectors on Tera2 PCoIP host cards are for diagnostic purposes. Jumpers J15 and J25 are configurable and their functions are described below. If you want Tera1 jumper explanations instead, refer to  What are the jumpers on the Tera1 host …
Knowledge Base Article Troubleshooting Setup Remote Workstation Card
Last modified: April 17, 2024
2853
PCoIP Session Statistics Viewer
PCoIP Session Statistics Viewer displays PCoIP software session statistics in a clear visual user interface (UI). The program can capture and graph real-time data from a virtual machine (VM) that is in session, or it can graph previously captured data by …
Knowledge Base Article Advisory Session Performance HP Anyware
Last modified: September 14, 2023
22040
What are the requirements to support pre-session smart card authentication when connecting to VMware Horizon (View)?
Note: With the release of PCoIP Zero Client firmware 6.1.0, the information in the knowledge base article has been moved into the PCoIP Zero Client Administrators' guide to ensure the list is current at the time of each firmware release. See PCoIP Zero …
Knowledge Base Article Troubleshooting Setup Security Session Authentication Third Party Enhancements Zero Clients
Last modified: December 31, 2023
2435
Why can't I change the display resolution in Windows when using HP Anyware on Windows?
Problem When connected to a remote machine via HP Anyware on Windows, opening the display settings results in greyed out options and a message "Some settings are controlled by your system administrator". You cannot change the screen resolution, select the …
Knowledge Base Article Troubleshooting Display HP Anyware Zero Clients
Last modified: April 16, 2024
11742