Upgrading from firmware 3.4.x or earlier, a message displays indicating my USB devices failed authorization
Problem When upgrading PCoIP Zero Client firmware from 3.4.x, USB locally terminated devices work, but no redirected (bridged) USB devices work. When viewing attached devices in the Administrator Web Interface (AWI) only the mouse and keyboard show as …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: September 25, 2023
669
How to identify which USB port on my PCoIP Zero Client is behind an integrated/internal USB hub?
Scenario In some cases a user will plug a USB device into a port on a PCoIP Zero Client and the device will fail or not work as expected. This is caused when a USB hub is used between the USB peripheral and the PCoIP Zero Client root hub. This is not …
Knowledge Base Article Tutorial Peripheral Devices Zero Clients
Last modified: September 3, 2023
6678
Management Console profile with blacklisted ciphers fails to apply to Remote Workstation Card
If a Management Console profile is configured to blacklist any of the following Remote Workstation Card ciphers, the profile application will fail on Remote Workstation Cards running firmware 21.01 or newer. TLS_RSA_WITH_AES_256_GCM_SHA384 …
Knowledge Base Article Troubleshooting Management Management Console
Last modified: September 3, 2023
142
How do I make PCoIP Remote Workstation Card USB devices work on my Fujitsu CELSIUS R930 workstation?
Answer: If USB devices won't work on a R930, move the PCoIP Remote Workstation Card to a PCIe slot that is serviced by a populated CPU socket. Why this is necessary: The R930 has two sockets. If the unit ships with only one socket populated (a single …
Knowledge Base Article Troubleshooting Setup Peripheral Devices Remote Workstation Card
Last modified: September 3, 2023
215
The Mouse and Keyboard are not working with the HP Anyware PCoIP Linux Agent
Problem When connecting to a Linux desktop running the HP Anyware PCoiP Agent for Linux Standard or Graphics, you have no keyboard or mouse input but your desktop shows.   Cause There are two main reasons why this can happen: The display topology between …
Knowledge Base Article Troubleshooting Peripheral Devices HP Anyware
Last modified: September 3, 2023
1475
Does the PCoIP Zero Client have left hand mouse configuration settings?
The PCoIP Zero Client currently has no specific left hand mouse setting. The PCoIP Zero Client configuration options in the OSD were designed to negate the necessity for right hand or left hand functionality therefore both buttons act the same. Right hand …
Knowledge Base Article Advisory Peripheral Devices Zero Clients
Last modified: September 3, 2023
223
Which webcams are supported by the various PCoIP host/client configurations?
Please note that some webcam models have been found to contain different hardware within the same model (possibly identified by a hardware revision number), causing these webcams to behave differently when connected to a PCoIP Zero Client. Ensure to test …
Knowledge Base Article Advisory Peripheral Devices Zero Clients
Last modified: September 20, 2023
7203