Sample CentOS 7.4 DHCP configuration file for PCoIP Management Console auto discovery
The purpose of this tutorial is to provide a sample DHCP configuration for auto discovery of the PCoIP Management Console 2.x and newer. In this set up the following were deployed: CentOS 7.4 VM hosted on ESXi 5.5 server. Configured the CentOS VM with two …
Knowledge Base Article Tutorial Management Management Console
Last modified: December 11, 2018
565
How do I restrict a USB device in PCoIP Zero Client where a Hub is used?
Scenario Introduced in Firmware 4.1 is a new feature that allows a keyboard and mouse to be locally terminated behind a hub on a PCoIP Zero Client. Previously all devices on a HUB were treated as one and the keyboard and mouse were remotely terminated. …
Knowledge Base Article Tutorial Peripheral Devices Zero Clients
Last modified: November 18, 2022
545
What happens when you change the PCoIP Zero Client's Authorized Devices list to allow desired devices?
When you specify the devices you want to allow by adding them to the  Authorized Devices list, this automatically blocks everything else. That means there is no need to add devices you don't want to allow to the Unauthorized Devices list. Caution! Before …
Knowledge Base Article Tutorial Peripheral Devices Zero Clients
Last modified: November 18, 2022
506
Can I manage PCoIP endpoints external to the corporate network with the PCoIP Management Console?
The PCoIP Management Console 1.x & 2.x cannot manage PCoIP devices that are external to the corporate network or behind a NAT over the WAN. But the PCoIP Management Console 1.x & 2.x can manage devices that are accessible over a routable network, so if …
Knowledge Base Article Tutorial Management Management Console
Last modified: September 19, 2023
493
Why is the network connection lost when a USB disk is plugged into a PCoIP Zero Client?
Scenario A desktop freeze, session disconnect or "network connection lost" (if the overlay network error message is enabled) message is displayed after an USB disk is plugged into a PCoIP Zero Client.   Cause A heavy load such as autoplay on a flash drive …
Knowledge Base Article Tutorial Peripheral Devices Zero Clients
Last modified: November 24, 2022
486
No audio when using Unified Communications with a USB headset
Problem Some users have reported no audio when using Unified Communications solution in firmware 4.7.0, they can only hear the ring of the incoming call and when the call is answered there is no Rx/Tx audio.   Cause This issue has been tracked down to the …
Knowledge Base Article Troubleshooting Performance Peripheral Devices Zero Clients
Last modified: November 7, 2022
467