How do I find the IP address of my newly installed PCoIP Zero Client or PCoIP Remote Workstation card?
Answer: You can determine the IP address associated with your device using one of the following methods: Before you begin, write down the MAC address of the device you want to determine the IP address of. For most of these methods, the MAC address is …
With All Access, is there still a free option for PCoIP Zero Client firmware and PCoIP Management Console?
Yes,  HP Anyware does offer the ability to trial free of charge, the Zero client firmware and the Management Console.  Once a trial is complete, the Management Console will still be able to be used to manual management of up to 100 endpoints. Subscription …
Sample nginx configuration for proxy when using remote device management
This is a sample configuration when using a NGINX version 1.14.1 reverse proxy. It was used for a NGINX system installed on Rocky Linux 8. You will be required to modify the highlighted unique fields for your environment. Other reverse proxy systems may …
Troubleshooting Management Console Connectivity with Firmware 20.01
Firmware version 17.05 or 20.01 or newer is intended to be managed by PCoIP Management Console 20.01 or newer. HP Anyware recommends upgrading to PCoIP Management Console 20.01 prior to deploying firmware 17.05 or 20.01. Before using PCoIP Zero Client or …
Configuration of smart cards with PCoIP Zero Clients and VMWare Horizon
This article is provided to help administrators in setting up smart card authentication in zero clients connecting to VMWare Horizon. This article has been reviewed against the following supported hardware and software versions: VMware Horizon 7.2 PCoIP …
Using HP Anyware PCoIP Zero Clients and Remote Workstation Cards on a direct-connect (no IP) network
Direct-connect (no IP network) configurations, sometimes incorrectly referred to as "home-run networks", refer to a direct connection between 2 devices without network switches/hubs installed using straight through cables via patch-panels. Although zero …
Linux DHCP server configuration when using DHCP Discovery on PCoIP Management Console 2.x and 3.x
Answer: This is based on PCoIP Management Console 2.x and newer only This is an example of configuring a Linux DHCP server when using DHCP Option for device discovery. The DHCP server is configured by editing the configuration file: /etc/dhcpd.conf This …