Connection Manager Session Health Check - Diagnostics and troubleshooting guide
Summary To receive a detailed connection manager diagnostic report, create a CM  support/log file bundle  and then submit this bundle to the PCoIP  health check   tool.  Once the files are submitted, it will take 5-10 minutes to produce a detailed …
Why do I receive a "Not Authenticated" error when connecting a PCoIP Client to Cloud Access Software or VMware Horizon through a load balancer?
Problem When using a PCoIP Zero Client or PCoIP Software Client to connect to a PCoIP Connection Manager or VMware Horizon View Connection/Security Server (VCS/VSS) through a load balancer you get the error message 'Not Authenticated'. While reviewing the …
How do I enable NTP on PCoIP Zero Clients and PCoIP Remote Workstation Cards?
Enabling NTP is important on the PCoIP Zero Client and PCoIP Remote Workstation Card. NTP is using for the following: Setting the time and date of the PCoIP Zero Client and PCoIP Remote Workstation Card. As there is no battery on the devices, the time and …
How do I enable and disable the PCoIP Zero Client session disconnect CTRL-ALT-F12 key sequence?
Enable When using a PCoIP Zero Client to connect to HP Anyware, Amazon Workspaces or VMware Horizon View the Ctrl-Alt-F12 shortcut is enabled by default. This setting can be configured via the AWI or PCoIP Management Console. When using a workstation with …
Imprivata OneSign 4.9 SP1 causes instabilities with the password entry when connected to PCoIP Zero Clients.
Answer: Password authentication instabilities specific to Imprivata OneSign version 4.9 SP1 (released Oct 1st, 2014) and PCoIP Zero Clients are described below. Scenario 1: Once a user has successfully authenticated using a valid username and password, …
Host Session Health Check - Diagnostics and troubleshooting guide
Summary To receive a detailed host diagnostic report, create a host  support/log file bundle  and then submit this bundle to the PCoIP  health check   tool.  Once the files are submitted, it will take 5-10 minutes to produce a detailed report.  The report …
How do I reset the configuration parameters entered on my PCoIP Zero Client or PCoIP Remote Workstation Card?
Answer: There are four ways to reset the PCoIP Zero Client to default settings which are described below. The PCoIP Remote Workstation card (also known as a PCoIP host card) has one reset procedure also described below. Some network information will be …
VMware View Client with dual Virtual NICs unable to connect to virtual desktop
Scenario A VMware View Client with dual virtual NICs configured may not be able to connect to the virtual desktop.  Note: this article does not apply to PCoIP Zero Clients. Dual Virtual NICs Configured on the View Client   Cause If the client has been …
Unauthenticated User can take control of PCoIP Management Console by resetting the default password
Summary Teradici PCoIP Management Console versions 20.01.0 and 19.11.1 are vulnerable to unauthenticated password resets of the default admin account. This vulnerability only exists when the default admin account is not disabled. The affected Management …