Teradici Documentation and Downloads | Documents and Downloads for Teradici products

Sort by

What do the power LED and PCoIP LED on the PCoIP Zero Client indicate?

The power button LED indicates the PCoIP Zero Client's power status or, when flashing green, the host PC/workstation's low-power state. The PCoIP LED is a separate indicator on the PCoIP Zero Client (usually directly above the power button LED). It lights …

How do I gather PCoIP client logs for the HP t410 (and change its logging verbosity)?

The HP t410 Smart Zero Client uses Teradici's PCoIP software. The PCoIP client logs are accessible on a HP t410 client through the on-screen-display. A bundle of log files can be saved to a local USB flash drive connected to the t410 client using the …

Knowledge Base Article Tutorial Setup Zero Clients

Last modified: July 27, 2023

1667

What type of slot is required to install a PCoIP Remote Workstation Card?

A PCoIP Remote Workstation Card can be inserted into a PCIe x1, x4, x8, or x16 slot. Be sure that the host PC/workstation has a spare PCIe slot and that the PCoIP Remote Workstation Card is properly inserted into a PCIe slot, not a PCI slot. Note: In …

Random individual and mass client disconnects due to Cisco VSS Inter-switch links

Problem Random individual client disconnect, or mass client disconnects when connecting clients (PCoIP Software Clients, VMware View Clients, or PCoIP Zero Clients) connected to HP Anyware or VMware View virtual desktops. Cause There have been observed …

Why can a session not be establish after a user disconnects while the Windows "waiting for programs to close" dialog is showing?

Problem When disconnecting a PCoIP session while Windows is shutting down or a user account is logging off with the "waiting for programs to close" dialog is showing; the ability to reconnect the PCoIP session is lost. Cause When Windows is shutting …

How do I configure a Peer-to-Peer Connection between a PCoIP Zero Client and a PCoIP Remote Workstation Card?

Requirements This article describes the configuration of a peer-to-peer, or dedicated connection between a PCoIP Zero Client and a PCoIP Remote Workstation Card including dual and quad display scenario's. Single or dual display requires a single PCoIP …

What does the error message "Session Closed Remotely" mean?

There are a number or reasons that the message "Session Closed Remotely" appears during a brokered session listed below. Informational Messages Closed by login at an alternate location or host shutdown/restart User initiated logout Disconnected by …

How to configure a PCoIP Zero Client to auto-connect to a Remote Workstation Card

Answer: To enable auto connect, you need to peer the PCoIP Zero Client to the Remote Workstation Card. You will need the IP and MAC of the host. You enter this in the PCoIP Zero Client's configuration (On Screen Display or Administrative Web Interface), …

Filter by Products

Filter by Topics

Search Knowledge Center

Filter by Products

Filter by Topics