What are the network maximum transmission unit (MTU) requirements for PCoIP?
PCoIP maximum transmission unit (MTU) Requirements Every network has a MTU that dictates the maximum size a individual network packet can be for transmission. If the packet is larger than the MTU it will be fragmented and sent as multiple packets or …
PCoIP TROUBLESHOOTING STEPS: Smart cards and Proximity cards
This article provides a brief list of troubleshooting steps and describes some common issues for smart card and proximity card failures. It is not intended to be a comprehensive troubleshooting guide.  Prior to diving into a deep investigation please …
Troubleshooting out of order packets impacting the PCoIP protocol?
Problem The PCoIP session performance is poor. The logs indicate high packet loss and the error messages related to out of order packets. Note:The default PCoIP server logs will indicate when out of order mode is activated and deactivated. To see …
How to obtain the correct current certificate to upload to the PCoIP Zero Client certificate store in VMware Horizon View environments.
Background: This Knowledge Base article is limited to PCoIP Zero Clients in VMware Horizon View environments. The certificate(s) loaded on the PCoIP zero client ensures that the peer server it connects to is trusted. The certificate can be provided from a …
How do I check for packet loss on the ESX interface?
If there is packet loss on a PCoIP protocol session, but an analysis of network devices in the path show no loss and they have been properly configured (see  Network session checklist for PCoIP protocol LAN and WAN deployments ) then you may want to …
VMware ESXi, Horizon View, and PCoIP software compatibility matrix lists
Note: This knowledge base article contains information for VMware Horizon view 6.1 and prior. For the latest information please visit the VMware site. You will be able to find matrices relating to the following: VMware Horizon (View)   ESXi - Build …
Configuration of smart cards with PCoIP Zero Clients and VMWare Horizon
This article is provided to help administrators in setting up smart card authentication in zero clients connecting to VMWare Horizon. This article has been reviewed against the following supported hardware and software versions: VMware Horizon 7.2 PCoIP …
Using HP Anyware PCoIP Zero Clients and Remote Workstation Cards on a direct-connect (no IP) network
Direct-connect (no IP network) configurations, sometimes incorrectly referred to as "home-run networks", refer to a direct connection between 2 devices without network switches/hubs installed using straight through cables via patch-panels. Although zero …
PCoIP Zero Client refuses to connect to a View Connection Server
This is a common issue we run into especially when we depreciate older security components from our firmware. We ran into this issue when we depreciated TLS1.0 and are once again seeing it mow that we have depreciated TLS1.1 The typical message the user …