How do I upload firmware on PCoIP Zero Clients or PCoIP Remote Workstation Card?
This knowledge base article applies to using the Administrative Web Interface (AWI) as the tool used to upload firmware. To upload the firmware using the PCoIP Management Console, refer to Management Console 202x.x (or 1.10.x) administrators' guide and …
Which webcams are supported by the various PCoIP host/client configurations?
Please note that some webcam models have been found to contain different hardware within the same model (possibly identified by a hardware revision number), causing these webcams to behave differently when connected to a PCoIP Zero Client. Ensure to test …
How to identify which USB port on my PCoIP Zero Client is behind an integrated/internal USB hub?
Scenario In some cases a user will plug a USB device into a port on a PCoIP Zero Client and the device will fail or not work as expected. This is caused when a USB hub is used between the USB peripheral and the PCoIP Zero Client root hub. This is not …
The mouse and keyboard do not work when connecting to the PCoIP Remote Workstation Card from a PCoIP Software Client?
Problem When connecting to a PCoIP Remote Workstation Card from a HP Anyware PCoIP Software Client the mouse and keyboard do not work. Connecting and disconnecting does not help and the screen resolution and layout appears to be correct.   Cause For the …
PCoIP TROUBLESHOOTING STEPS: Smart cards and Proximity cards
This article provides a brief list of troubleshooting steps and describes some common issues for smart card and proximity card failures. It is not intended to be a comprehensive troubleshooting guide.  Prior to diving into a deep investigation please …
Why does my webcam or USB headset not work when connected to a PCoIP Zero Client at the same time?
Problem Your webcam and USB headset are connected to the PCoIP Zero Client at the same time and only one of the two works. When only one of the two devices is connected, it works as anticipated. In the example below, the Logitech USB Headset (901) is the …
Sample nginx configuration for proxy when using remote device management
This is a sample configuration when using a NGINX version 1.14.1 reverse proxy. It was used for a NGINX system installed on Rocky Linux 8. You will be required to modify the highlighted unique fields for your environment. Other reverse proxy systems may …
Troubleshooting Management Console Connectivity with Firmware 20.01
Firmware version 17.05 or 20.01 or newer is intended to be managed by PCoIP Management Console 20.01 or newer. HP Anyware recommends upgrading to PCoIP Management Console 20.01 prior to deploying firmware 17.05 or 20.01. Before using PCoIP Zero Client or …