How do I upload firmware on PCoIP Zero Clients or PCoIP Remote Workstation Card?
This knowledge base article applies to using the Administrative Web Interface (AWI) as the tool used to upload firmware. To upload the firmware using the PCoIP Management Console, refer to Management Console 202x.x (or 1.10.x) administrators' guide and …
Knowledge Base Article Tutorial Setup Management Management Console Remote Workstation Card Zero Clients
Last modified: September 22, 2023
9098
Why does the "Source signal on other port" message appear on my display?
This indicates that a video source connected to the Host does not correspond with the video port used on the PCoIP Zero Client. This can be corrected by either swapping the video ports used on the Host or the PCoIP Zero Client. The following shows two …
Knowledge Base Article Advisory Display Remote Workstation Card Zero Clients
Last modified: September 3, 2023
4883
AD credentials can be leaked from the Management Interface for HP Anyware Connector (current and legacy)
Summary   An insufficiently protected credentials vulnerability has been identified in the Management Interface of the HP Anyware Connector and the HP Anyware Connector Legacy for releases from April 20, 2020 and earlier (v15 and earlier for HP Anyware …
Knowledge Base Article Advisory Security Management HP Anyware
Last modified: September 3, 2023
72
What is monitor emulation on the PCoIP Remote Workstation Card and how does it work?
Answer: Monitor emulation is a feature on the PCoIP Remote Workstation Card (also known as a host card) that ensures graphics cards see a valid EDID on a Display Port or DVI port on boot. This helps prevent the graphics card from driving DVI signals or DP …
Knowledge Base Article Advisory Display Setup Remote Workstation Card
Last modified: September 3, 2023
2195
What do the PCoIP Session 4 digit error codes mean when experience issues connecting to a remote host?
If you are having difficulties connecting a PCoIP client to a remote host and are receiving a 4 digit error code, the following table will provide suggested next steps.  If you don't see the error code in the table below, open a caes with HP Anyware …
Knowledge Base Article Troubleshooting Session HP Anyware
Last modified: January 24, 2024
13468
Troubleshooting PCoIP session Connection Issues.
Problem When connecting to a PCoIP Standard Agent for Windows, PCoIP Graphics Agent for Windows, PCoIP Standard Agent for Linux or PCoIP Graphics Agent for Linux the connection fails with one of the following messages: Error: Unable to connect to …
Knowledge Base Article Troubleshooting Session HP Anyware Remote Workstation Card Zero Clients
Last modified: November 9, 2023
38344