Teradici Documentation and Downloads | Documents and Downloads for Teradici products

Sort by

Does the PCoIP Management Console 2.x and 3.x ship with a default certificate?

Yes. The PCoIP Management Console since release 2.x ships with a HP Anyware self-signed certificate to allow the PCoIP Management Console to function out of the box. It is recommended that all users deploying the PCoIP Management Console 2.x or …

How many mouse buttons are supported by PCoIP Zero Clients?

Up to 5 mouse buttons are supported by Tera2 PCoIP Zero Clients in a scenario where the mouse is terminated locally at the PCoIP Zero Client. In a scenario where a mouse is plugged into a PCoIP Zero Client that has more then 5 buttons, the mouse needs to …

Does the PCoIP Zero Client have left hand mouse configuration settings?

The PCoIP Zero Client currently has no specific left hand mouse setting. The PCoIP Zero Client configuration options in the OSD were designed to negate the necessity for right hand or left hand functionality therefore both buttons act the same. Right hand …

What are the priorities for video, audio, and USB PCoIP traffic?

PCoIP technology gives priority to USB and audio, while imaging uses remaining available bandwidth. PCoIP technology optimizes user experience for a given bandwidth by adaptively controlling quality and update rate of the image data, and optionally …

Does PCoIP support DDC/CI to remotely controlled display settings?

To remotely control display settings using DDC/CI, you need: PCoIP Zero Client with firmware 2.3 or newer Monitor that supports DDC/CI that is connected to the PCoIP Zero Client. The DDC/CI protocol is vendor specific. To date, the NEC version of the …

Local Administrative Password setting is disabled after changing the firmware version in the profile in the PCoIP Management Console 3.0.0

Problem After changing the firmware version in a profile in PCoIP Management Console 3.0.0 the Local Administrative Password setting is no longer enabled and the password field is blank. Cause This issue is known to happen when the following conditions …

Recovering the OSD when the resolution was set to 800x600 or lower which removed functionality.

This occurs because these low resolutions do not display the OSD correctly, and access to some configurations are lost. Previously this was not an available feature which prevented devices being put into un-configurable states by setting resolutions to …

How do I make PCoIP Remote Workstation Card USB devices work on my Fujitsu CELSIUS R930 workstation?

Answer: If USB devices won't work on a R930, move the PCoIP Remote Workstation Card to a PCIe slot that is serviced by a populated CPU socket. Why this is necessary: The R930 has two sockets. If the unit ships with only one socket populated (a single …

Why does my USB memory stick heat up when connected to a PCoIP Zero Client?

Answer: When a USB memory stick is plugged into a PCoIP Zero Client it can warm up during normal operation. As the zero client chassis warms up, the USB memory stick also heats up due to the metal connections (both signals and shielding). This …

Is there any information left on my PCoIP Zero Client after a reset is performed?

When a PCoIP Zero Client is factory reset, the following information will still reside in flash: If a PCoIP Zero Client is connected to a network during the reset process, the logs will catch the normal network information on start up as part of its …

Knowledge Base Article Tutorial Security Zero Clients

Last modified: November 18, 2022

219

Filter by Products

Filter by Topics

Search Knowledge Center

Filter by Products

Filter by Topics