What does the error message "Session Closed Remotely" mean?
There are a number or reasons that the message "Session Closed Remotely" appears during a brokered session listed below. Informational Messages Closed by login at an alternate location or host shutdown/restart User initiated logout Disconnected by …
Knowledge Base Article Advisory Session HP Anyware Remote Workstation Card Zero Clients
Last modified: December 9, 2022
960
How do I tell which encryption method is being used for the PCoIP session?
PCoIP technology supports just AES-256-GCM encryption. Both methods of encryption - AES-128-GCM and Salsa20-256-round12 have been deprecated. The examples below are still valid when trying to determine which encryption method is being used. In viewing the …
Knowledge Base Article Advisory Security HP Anyware Remote Workstation Card Zero Clients
Last modified: December 4, 2023
913
Random Session Disconnects due to Spanning Tree Configuration
Scenario PCoIP sessions experience random session disconnects of some or all clients. Re connection is not always possible straight away.   Cause A Spanning Tree Protocol (STP) re-calculation can cause random session disconnects. STP will cause the …
Knowledge Base Article Troubleshooting Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: December 9, 2022
870
How does competing traffic on the network affect PCoIP performance?
This article outlines how other types of network traffic may negatively impact PCoIP performance. Please refer to  Network session checklist for PCoIP protocol LAN and WAN deployments  for more details on network configuration. On most modern LAN's, …
Knowledge Base Article Tutorial Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: September 3, 2023
681
What network switch or router queue size should be used?
Network device queues, also known as network buffer's, should be configured to accommodate 50ms to 100ms of PCoIP protocol traffic in total. This assumes that one network device (e.g. switch or router) is congested for a given network path. If the network …
Knowledge Base Article Advisory Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: September 19, 2023
615
What is the impact of minimum and maximum initial image quality on a PCoIP Session?
Minimum and maximum initial image quality sets the lower and upper quality level. The default values in HP Anyware is Q40 for the minimum initial image quality and Q80 for the maximum initial image quality. If PCoIP estimates there is adequate bandwidth …
Knowledge Base Article Advisory Display Performance Remote Workstation Card HP Anyware
Last modified: July 31, 2023
610
Should I use an initial image quality of Q100?
An initial image quality of Q100 will deliver the highest quality of image PCoIP can deliver. Q100 is not lossless, for a lossless image, build to lossless must be enabled.  How to configure the Turn off Build-to-Lossless feature session variable in GPO …
Knowledge Base Article Advisory Display Performance Remote Workstation Card Zero Clients HP Anyware
Last modified: August 1, 2023
592
HP Anyware Top Features
Helps you to understand the HP Anyware Top Features. ~65 mins This course will help you to understand the top three feature of HP Anyware. After completing this course you would be able to understand the requirements and use the top HP Anyware features. …
Knowledge Base Article Courses HP Anyware
Last modified: March 8, 2024
433