Configuring PCoIP Clients
After completing this unit, you’ll be able to: Understand the requirements for using configurations Understand the procedure to configure client machine 40 mins   Configuring Soft Clients PCoIP clients can be configured to allow you to set different user …
Knowledge Base Article Tutorial Setup HP Anyware
Last modified: September 3, 2023
401
What does "IPC: Frame encode took xxx ms so far. Dropping down the quality to index x." in the log files indicate?
Answer: In this case, the imaging encoder has determined that too many bits were being sent in the upper portion of the frame (i.e. flooding) which causes the frame to take longer to encode, and therefore appears unresponsive to the user (> 750 ms to …
Knowledge Base Article Troubleshooting Performance HP Anyware Zero Clients Remote Workstation Card
Last modified: December 9, 2022
372
PCoIP Configuration Guide
Helps you to understand the configurations that you can do on PCoIP Agents and Clients. ~65 mins This course will help you to understand the different configurations that can be done on the Agents and Client in order to optimize PCoIP performance. After …
Knowledge Base Article Courses Setup HP Anyware
Last modified: September 3, 2023
367
Skipped compressing pkt due to PCM bit length in the PCoIP Remote Workstation Card Logs
Scenario User notices poor audio quality when connected to a PCoIP Remote Workstation Card (host card), and the following entries are in the PCoIP Remote Workstation Card's logs: 12/04/2013, 00:01:41> LVL:3 RC: 0 AUDIO_CMPRS :Skipped compressing pkt due …
Knowledge Base Article Troubleshooting Performance Remote Workstation Card Zero Clients
Last modified: August 3, 2023
348
Will out of order packets impact a PCoIP session?
PCoIP will work when packets are becoming out of order between the two PCoIP endpoints. Re-ordering packets on PCoIP endpoints requires that packets are held in a queue/buffer while waiting to receive the packets that need to be put back into order.  With …
Knowledge Base Article Advisory Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: December 9, 2022
318
Why do I get poor performance on an MPLS network?
There are a number of configuration requirements for using PCoIP protocol on an MPLS network.  Prioritize PCoIP packets as a best practice Avoid packet loss Avoid out-of-order packets PCoIP protocol may consider out-of-order packets as lost if the data …
Knowledge Base Article Troubleshooting Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: December 9, 2022
302
How does PCoIP share bandwidth over the network?
The BW Limit is dynamically calculated and represents the bandwidth the PCoIP session estimates to be available given the network conditions. The calculation takes into account the existing bandwidth usage, packet loss and any high latency spikes. The …
Knowledge Base Article Advisory Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: December 9, 2022
286
Configure HP Anyware Event Log Verbosity
HP Anyware event log verbosity (level) can be configured on both the client and agent software.   PCoIP Software Client for Windows: http://www.teradici.com/web-help/pcoip_client/windows/current/#Topics/Troubleshooting.htm?Highlight=Setting%20Log%20Levels …
Knowledge Base Article Tutorial Setup HP Anyware
Last modified: September 3, 2023
287
When the network experiences periods of high congestion what will happen to the users experience?
PCoIP will adjust to the network conditions to deliver the best PCoIP experience possible, for the given network conditions, for the user. During periods of congestion the user experience: A blurry or compressed image Momentary block screens Stuttering …
Knowledge Base Article Tutorial Performance Remote Workstation Card Zero Clients HP Anyware
Last modified: December 9, 2022
254