How do I upload firmware on PCoIP Zero Clients or PCoIP Remote Workstation Card?
This knowledge base article applies to using the Administrative Web Interface (AWI) as the tool used to upload firmware. To upload the firmware using the PCoIP Management Console, refer to Management Console 202x.x (or 1.10.x) administrators' guide and …
Linux DHCP server configuration when using DHCP Discovery on PCoIP Management Console 2.x and 3.x
Answer: This is based on PCoIP Management Console 2.x and newer only This is an example of configuring a Linux DHCP server when using DHCP Option for device discovery. The DHCP server is configured by editing the configuration file: /etc/dhcpd.conf This …
What does GSOAP :tera_gsoap_tls_shutdown: tera_rtos_event_get timeout mean in the log?
Problem Message GSOAP :tera_gsoap_tls_shutdown: tera_rtos_event_get timeout is found in host or client log file.   Cause GSOAP is the protocol used by the PCoIP Management Console 1.x. This error is caused by a socket being opened by GSOAP and not closed …
Can I use both DHCP options and DNS SRV records for device discovery in the PCoIP Management Console at the same time?
Answer: No . Note: It is recommended to user either DHCP Options or DNS Records when configuring auto-discovery for the PCoIP Management Console. To determine which to use you need to understand your environment. For example if you are only going to have …
How do I Set Zero Client password in PCoIP Management Console?
Use PCoIP Management Console PCoIP Management Console is recommended to manage the password setup for zero clients, including enabling the password protection for OSD and AWI, setting the password, and whether or not hiding the Password options from OSD …
How do I disable login username caching on a PCoIP Zero Client?
On a PCoIP Zero Client, username caching is set in the advanced options and can be disabled from the OSD Screen, the Administrative Web Interface (AWI), or the PCoIP Management Console.    From the OSD Screen: Under Options, select Configuration In the …
Determining why the PCoIP Zero Client was reset to factory default
Problem The PCoIP Zero Client unexpectedly reset to factory default.    Cause The PCoIP Zero Client would only reset to factory defaults if one of the reset options was used. The PCoIP Zero Client can be reset by the PCoIP Management Console, through the …
Why are some Tera2 PCoIP Zero Clients showing the Online status as "False" in PCoIP Management Console 2.x and 3.x?
This indicates that the Tera 2 PCoIP Zero Client is not being managed by the PCoIP Management Console and can be one of several reasons: Not powered on Firmware has been downgraded to 4.x so no longer manageable by PCoIP Management Console 2.x and 3.x NTP …