Network session checklist for PCoIP protocol LAN and WAN deployments
The PCoIP® Session Planning Guide  is an essential document for any PCoIP protocol deployment.  It covers key network design considerations as well as documents a number of network configuration issues that impact desktop performance. Ensure consistent …
How do I upload firmware on PCoIP Zero Clients or PCoIP Remote Workstation Card?
This knowledge base article applies to using the Administrative Web Interface (AWI) as the tool used to upload firmware. To upload the firmware using the PCoIP Management Console, refer to Management Console 202x.x (or 1.10.x) administrators' guide and …
FAQ - What are the required TCP/UDP ports for PCoIP technology?
Answer: The TCP and UDP ports assigned for PCoIP technology are shown in the tables below. Please note that IANA assigned port 4172 to the PCoIP protocol. HP Anyware License Server HP Anyware License Server Port Port Number Direction Description Online …
Linux DHCP server configuration when using DHCP Discovery on PCoIP Management Console 2.x and 3.x
Answer: This is based on PCoIP Management Console 2.x and newer only This is an example of configuring a Linux DHCP server when using DHCP Option for device discovery. The DHCP server is configured by editing the configuration file: /etc/dhcpd.conf This …
Sample nginx configuration for proxy when using remote device management
This is a sample configuration when using a NGINX version 1.14.1 reverse proxy. It was used for a NGINX system installed on Rocky Linux 8. You will be required to modify the highlighted unique fields for your environment. Other reverse proxy systems may …
How do I enable NTP on PCoIP Zero Clients and PCoIP Remote Workstation Cards?
Enabling NTP is important on the PCoIP Zero Client and PCoIP Remote Workstation Card. NTP is using for the following: Setting the time and date of the PCoIP Zero Client and PCoIP Remote Workstation Card. As there is no battery on the devices, the time and …
Workaround for database failures when restoring or migrating from PCoIP Management Console 2.4 or older to versions 2.5.1 or newer.
Customers on Management Console (MC) 2.4 or older, restoring databases, or migrating to 2.5.1 or newer are required to run this mandatory database clean-up script prior to the restore or migration. These steps reduce the size of the database which is …
PCoIP Management Console 2.x and 3.x is not loading pages properly when accessing the web interface via the FQDN
Problem Using fully qualified domain name (FQDN) in your browser to access the PCoIP Management Consoles web interface displays only a portion of the page. Using the IP address, the web interface page is displayed properly and user is prompt for user name …
How do I enable and disable the PCoIP Zero Client session disconnect CTRL-ALT-F12 key sequence?
Enable When using a PCoIP Zero Client to connect to HP Anyware, Amazon Workspaces or VMware Horizon View the Ctrl-Alt-F12 shortcut is enabled by default. This setting can be configured via the AWI or PCoIP Management Console. When using a workstation with …