My PCoIP Zero Clients at the remote location cannot connect to PCoIP Management Console 3.x
Problem PCoIP Zero Clients in remote locations are not connecting to the PCoIP Management Console 3.x   Cause This issue was tracked down to a setting in the PCoIP Management Console 3.x (MC). Check under Settings > Remote and confirm if you have entered …
Knowledge Base Article Troubleshooting Management Management Console
Last modified: November 7, 2022
636
Installing Management Console
After completing this unit, you’ll be able to: Install the HP Anyware Management Console, or Migrate to a newer version 25 mins   HP Anyware Management Console is released in three formats that feature CentOS as the PCoIP Management Console installation …
Knowledge Base Article Tutorial Management Setup Management Console
Last modified: August 2, 2023
629
How do I disable login username caching on a PCoIP Zero Client?
On a PCoIP Zero Client, username caching is set in the advanced options and can be disabled from the OSD Screen, the Administrative Web Interface (AWI), or the PCoIP Management Console.    From the OSD Screen: Under Options, select Configuration In the …
Knowledge Base Article Tutorial Setup Management Session Management Console Zero Clients
Last modified: September 3, 2023
576
Sample CentOS 7.4 DHCP configuration file for PCoIP Management Console auto discovery
The purpose of this tutorial is to provide a sample DHCP configuration for auto discovery of the PCoIP Management Console 2.x and newer. In this set up the following were deployed: CentOS 7.4 VM hosted on ESXi 5.5 server. Configured the CentOS VM with two …
Knowledge Base Article Tutorial Management Management Console
Last modified: December 11, 2018
558
Can I manage PCoIP endpoints external to the corporate network with the PCoIP Management Console?
The PCoIP Management Console 1.x & 2.x cannot manage PCoIP devices that are external to the corporate network or behind a NAT over the WAN. But the PCoIP Management Console 1.x & 2.x can manage devices that are accessible over a routable network, so if …
Knowledge Base Article Tutorial Management Management Console
Last modified: September 19, 2023
491
When does the PCoIP Management Console apply a resolution change using the Enable Preferred Resolution Override setting while in a PCoIP session?
In PCoIP Management Console (MC) 1.9.1 (and newer), PCoIP Zero Clients with firmware 4.1.2 (and newer) can be configured to override the attached monitors native resolution using the Enable Preferred Resolution Override feature. The setting is recognized …
Knowledge Base Article Troubleshooting Management Display Management Console Zero Clients
Last modified: September 3, 2023
448
Can't manage zero client after moving it to a different network
Scenario: You had the zero client managed by the management console and then moved the zero client to a different network. You can still connect to your desktop VM. You just cannot manage the zero client. Answer: Since network connectivity is confirmed …
Knowledge Base Article Troubleshooting Management Management Console Zero Clients
Last modified: November 8, 2020
387
Why does the Management Console not recognize the DNS-SRV records and not connect with my PCoIP Zero Clients?
Scenario On a non-Microsoft DNS server, the DNS records have been created and the SRV record set for auto-discovery. However, the PCoIP Management Console is not recognizing these records and the PCoIP Zero Client devices are not registering in the …
Knowledge Base Article Troubleshooting Management Management Console Zero Clients
Last modified: September 19, 2023
321
Profile application to Remote Workstation Card fails
Scenario : The remote workstation card is at a factory default. You set a basic Profile in the management console and apply the Profile. The Profile application fails. If you check the management console, there is no clue as to why the Profile failed. If …
Knowledge Base Article Troubleshooting Management Management Console Remote Workstation Card
Last modified: September 19, 2023
316