Why is the mouse pointer no longer visible when you bridge a pointer device on a PCoIP Zero Client?
Problem When using Teradici firmware version 4.5.1 and newer, after bridging the pointer device, the pointer is no longer visible on screen. Note: This does not apply to a connection to a PCoIP Remote Workstation Card.   Cause Firmware 4.5.1 and newer …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: September 20, 2023
1242
Do PCoIP Zero Clients support USB devices with a visible cursor, such as slate and scribe tablets when bridged to VMware Horizon View?
PCoIP Zero Clients support usb devices ( slate/scribe/pen tablets etc. ) but further configuration may be required. Scenario After connecting your device you can use the tablet for basic cursor movement and mouse click operations just like a regular …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: September 3, 2023
1193
Why is USB not working when connecting a PCoIP Zero Client to a PCoIP Remote Workstation Card?
By default, all USB devices are bridged to the host with the PCoIP Remote Workstation Card and is dependent on the host OS. Please verify the following Make sure the USB devices are not unauthorized in the PCoIP Remote Workstation Card or PCoIP Zero …
Knowledge Base Article Troubleshooting Peripheral Devices Remote Workstation Card Zero Clients
Last modified: September 3, 2023
1174
Why do I hear pops and crackles or dead air in my PCoIP session when connecting with a PCoIP Zero Client?
This article refers to the audio playback using the PCoIP Analog Audio Data Channel from a host machine to a PCoIP Zero Client. It does not apply to microphone input from a PCoIP Zero Client to a VM.   Problem The PCoIP Zero Client must have either an …
Knowledge Base Article Troubleshooting Performance Zero Clients
Last modified: December 20, 2023
1164
Is it possible to disable the serial port on my Samsung PCoIP Zero Client monitor?
Scenario: Some PCoIP zero clients (i.e. Samsung PCoIP Zero Client monitors) come equipped with a serial port. The units are designed with a built in USB hub feeding both another USB connector and a serial connector. In a PCoIP session, the VM picks up the …
Knowledge Base Article Tutorial Peripheral Devices Zero Clients
Last modified: September 22, 2023
1000
How do I change the image quality properties of a PCoIP Remote Workstation Card?
Review the below table to understand where to change the image quality properties in a remote workstation environment. This information applies to sessions between PCoIP Zero Clients and a PCoIP Remote Workstation Card (i.e. host card). If you are using a …
Knowledge Base Article Tutorial Performance Display Setup Zero Clients
Last modified: July 31, 2023
936