How do I change the image quality properties of a PCoIP Remote Workstation Card?
Review the below table to understand where to change the image quality properties in a remote workstation environment. This information applies to sessions between PCoIP Zero Clients and a PCoIP Remote Workstation Card (i.e. host card). If you are using a …
Knowledge Base Article Tutorial Performance Display Setup Zero Clients
Last modified: July 31, 2023
952
Why is my display not working correctly when using an adaptor attached to my OEM supplied cable?
Problem After purchasing a HP Anyware product you discover the cable shipped with the HP Anyware product does not have the necessary Video/Display connector to interface with your GPU or monitor. To complete the connection an adaptor is used to change the …
Knowledge Base Article Troubleshooting Display Setup Remote Workstation Card Zero Clients
Last modified: September 14, 2023
881
What SFP modules have HP Anyware tested with the PCoIP Zero Client and PCoIP Remote Workstation Card?
Warning:  This is not a comprehensive list and contains modules that have been tested and/or deployed successfully in client environments. Since SPF modules are built by different manufacturers which may implement different engineering designs, it is …
Knowledge Base Article Advisory Setup Zero Clients
Last modified: September 14, 2023
859
How do I configure a Peer-to-Peer Connection between a PCoIP Zero Client and a PCoIP Remote Workstation Card?
Requirements This article describes the configuration of a peer-to-peer, or dedicated connection between a PCoIP Zero Client and a PCoIP Remote Workstation Card including dual and quad display scenario's. Single or dual display requires a single PCoIP …
Knowledge Base Article Tutorial Session Setup Remote Workstation Card Zero Clients
Last modified: July 31, 2018
847
What PCoIP GPO settings in VMware Horizon View take effect immediately after the change is made?
Answer: There are currently 4 GPO settings which changes take effect immediately. These are available in Horizon View 5.2 and are listed below along with links to the individual GPO descriptions. In Horizon View 5.3 an additional GPO was added to this …
Knowledge Base Article Advisory Setup Performance Third Party Enhancements Zero Clients
Last modified: September 3, 2023
805
Do PCoIP Zero Clients and PCoIP Remote Workstation Cards support HDMI connections?
PCoIP zero clients only come with the following connections: sVGA DVI (single and dual link) Display Port (1.1a) HDMI is not a supported connector type on PCoIP Zero Clients. You can purchase Display Port or DVI to HDMI cables and adapters however you may …
Knowledge Base Article Advisory Display Setup Remote Workstation Card Zero Clients
Last modified: July 31, 2023
717
Upgrading from firmware 3.4.x or earlier, a message displays indicating my USB devices failed authorization
Problem When upgrading PCoIP Zero Client firmware from 3.4.x, USB locally terminated devices work, but no redirected (bridged) USB devices work. When viewing attached devices in the Administrator Web Interface (AWI) only the mouse and keyboard show as …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: September 25, 2023
683
Why do USB 2.0 or isochronous devices fail to work as expected when plugged into a Samsung NC220 or NC240 PCoIP monitor?
Answer: This occurs because on the NC220 and NC240 monitor series, USB Ports 0, 1 and 2 are brought out directly and port 3 is connected to an internal hub. On this hub, 1 hub port is connected to a RS232 device, and another hub port is connected to an …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: November 21, 2022
632