What is an acceptable level of packet loss?
Just like VoIP and video conferencing, PCoIP is a real time protocol. Once a packet is lost in transit, there typically isn't time to re transmit before the PCoIP session is impacted. Therefore, the most acceptable level of loss is 0%. Packet loss maybe …
Tera 1 PCoIP Zero Client or PCoIP Remote Workstation card firmware prerequisites when upgrading to new firmware releases.
Answer: Note: HP Anyware Tera 1 PCoIP Zero Client devices and firmware are End of Life. Whist Tera 1 based PCoIP Zero Clients can be upgraded to Firmware 4.7.1 they lack many of the modern security standards for network communication. It is recommended …
What are the requirements to support pre-session smart card authentication when connecting to VMware Horizon (View)?
Note: With the release of PCoIP Zero Client firmware 6.1.0, the information in the knowledge base article has been moved into the PCoIP Zero Client Administrators' guide to ensure the list is current at the time of each firmware release. See PCoIP Zero …
What are the factory default network settings for PCoIP Zero Clients and PCoIP Remote Workstation Cards?
Answer: An OEM may change the factory default network settings. Please refer to your OEM's manual for detailed information. Most devices generally have the following factory default network settings: DHCP enabled Fallback IP address (PCoIP Remote …
How do I access CTRL-ALT-DEL on a touchscreen monitor with Windows 7?
Answer: In Windows 7 environments where a touchscreen monitor uses the onscreen keyboard, consider enabling CTRL+ALT+ DEL, also known as the Secure Attention Sequence (SAS): Log in to the remote workstation or virtual desktop with the appropriate …
How does the PCoIP Zero Client/PCoIP Remote Workstation Card support remote power management?
Answer: This article describes how to remotely power down a host PC/workstation with a PCoIP Remote Workstation Card (i.e. host card) installed, and how to remotely power it up with wake on LAN (WOL). Note: VMWare View brokered connections do not support …
Can multi-factor authentication be used with PCoIP?
Multi-factor authentication systems are supported by Teradici Products. Examples of multi-factor authentication systems are RSA SecurID and Duo. HP Anyware Manager supports multi-factor authentication as secondary authentication via a radius server.  …
DHCP IP address lease changes when the PCoIP Zero Client firmware or PCoIP Remote Workstation firrmware is upgraded
Problem Updating PCoIP Zero Client firmware or PCoIP Remote Workstation Card firmware results in a new DHCP IP address lease. The issue will only occur under the following circumstances: Updating a PCoIP Zero Client from firmware 4.7.1 and prior to 4.8.0 …
Can I connect a PCoIP Zero Clients and Remote Workstation Cards via wireless network?
There are a number of options to consider for wireless connection of PCoIP devices such as PCoIP Zero Clients and PCoIP Remote Workstation cards.  Wireless Access Point Use a wireless access point (wireless bridge) to connect a PCoIP Zero Client or PCoIP …