Imprivata OneSign 4.9 SP1 causes instabilities with the password entry when connected to PCoIP Zero Clients.
Answer: Password authentication instabilities specific to Imprivata OneSign version 4.9 SP1 (released Oct 1st, 2014) and PCoIP Zero Clients are described below. Scenario 1: Once a user has successfully authenticated using a valid username and password, …
How do I avoid the red "HTTPS" in server address in the Connection Dialog on a PCoIP Zero Client?
All HP Anyware and VMware View 5.1 or newer has connection security requirements that are supported in PCoIP Zero Client firmware 4.0.0 or newer.  There are multiple scenario's with the certificate check that can result in a warning message and/or a red   …
Why does my PCoIP Zero Client indicate that it is unable to verify the View Connection Server's identity after the CA's root certificate has been uploaded via AWI and/or the PCoIP Management Console?
Problem The PCoIP Zero Client is presenting a certificate error when the server's corresponding Root CA or Intermediate Certificate has been loaded into the PCoIP Zero Client certificate store. The PCoIP Zero Client has a certificate check mode configured …
Alternative method to export the View Connection Server trusted root certificate for upload to PCoIP Zero Clients
The recommended options is to contact the VMware Horizon View administrator to obtain the recommended certificate. If this option is not available, the easiest way to obtain the certificate is to use a web browser and browse to  …
Amazon certificate change may affect PCoIP Zero Clients connecting to Amazon WorkSpaces
Problem When connecting to Amazon WorkSpaces, certificate errors are presented to the user. Scenario 1: Users of zero clients that have the Never connect to untrusted servers using the Amazon WorkSpaces session connection type connecting to Amazon …
Error block type is not 01 during 802.1x authentication
Problem When the PCoIP Zero Client has been configured for 802.1x authentication including loading the required certificates, the Network Access Controller is rejecting the authentication request with error messages such as The block type of the signature …
How do I enable IEEE 802.1x Network Authentication in PCoIP Zero Clients and PCoIP Remote Workstation Cards?
1) Identify the certificates used for IEEE 802.1x network authentication in your organization 2) Ensure that the certificates are properly formatted Certificates must be in .PEM format and less than 6 KB Both a client certificate and a server root CA …
Determining why the PCoIP Zero Client was reset to factory default
Problem The PCoIP Zero Client unexpectedly reset to factory default.    Cause The PCoIP Zero Client would only reset to factory defaults if one of the reset options was used. The PCoIP Zero Client can be reset by the PCoIP Management Console, through the …
Why are some Tera2 PCoIP Zero Clients showing the Online status as "False" in PCoIP Management Console 2.x and 3.x?
This indicates that the Tera 2 PCoIP Zero Client is not being managed by the PCoIP Management Console and can be one of several reasons: Not powered on Firmware has been downgraded to 4.x so no longer manageable by PCoIP Management Console 2.x and 3.x NTP …