Problem Your webcam and USB headset are connected to the PCoIP Zero Client at the same time and only one of the two works. When only one of the two devices is connected, it works as anticipated. In the example below, the Logitech USB Headset (901) is the …
In the Administrator Web Interface (AWI) of the PCoIP Zero Client you can review the status of any attached device ( i.e. monitors, usb ). The status of the device is as follows: Disconnected or Not Connected - no device connected to a display port. …
USB devices can be enabled or disabled which allows IT control of the use of peripherals with HP Anyware PCoIP Agent, VMware Horizon View using PCoIP protocol, or PCoIP Remote Workstation Cards. PCoIP Zero Clients provide unique USB security features that …
Answer: EHCI (Enhanced Host Controller Interface) is a high-speed controller standard that is publicly documented and provides high speed USB functionality. Tera2 based PCoIP Clients support USB 2.0 (EHCI) out of the box on all firmware releases. The …
This message indicates that an unauthorized USB device is attached to the PCoIP Zero Client. Be sure allowed USB devices are specified in the list of authorized devices and not in the list of unauthorized devices in the USB page of the PCoIP Zero Client's …
USBlyzer USBlyzer is a software protocol analyzer that can be used to observe USB traffic from the host perspective. It may be useful debugging cases where a device is plugged in successfully (it can be seen in Device Manager) but for some reason doesn't …
Answer: USB HID devices fail to initialize on PCoIP session start for HP Z420, Z620, Z820 workstations running BIOS 03.18 -3.68. HP has resolved the issue in BIOS release 03.69 Rev. A (9 May 2014). The BIOS file name is sp66326.exe. For more information …
The most common cause of slow USB data transfers is related to the network environment.USB data transfers are sensitive to the available network bandwidth, latency, and packet loss. Following are the few reasons that can cause the reduction in …
Teradici does not maintain a list of tested units. With the introduction of EHCI (USB 2) functionality, compatibility with currently manufactured DVD brands has improved greatly, particularly when the PCoIP Zero Client or PCoIP Remote Workstation Card …