What are the network maximum transmission unit (MTU) requirements for PCoIP?
PCoIP maximum transmission unit (MTU) Requirements Every network has a MTU that dictates the maximum size a individual network packet can be for transmission. If the packet is larger than the MTU it will be fragmented and sent as multiple packets or …
Knowledge Base Article Tutorial Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: September 3, 2023
6811
Troubleshooting out of order packets impacting the PCoIP protocol?
Problem The PCoIP session performance is poor. The logs indicate high packet loss and the error messages related to out of order packets. Note:The default PCoIP server logs will indicate when out of order mode is activated and deactivated. To see …
Knowledge Base Article Troubleshooting Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: September 3, 2023
5785
Using HP Anyware PCoIP Zero Clients and Remote Workstation Cards on a direct-connect (no IP) network
Direct-connect (no IP network) configurations, sometimes incorrectly referred to as "home-run networks", refer to a direct connection between 2 devices without network switches/hubs installed using straight through cables via patch-panels. Although zero …
Knowledge Base Article Tutorial Performance Setup Remote Workstation Card Zero Clients
Last modified: September 14, 2023
5181
Troubleshooting Video Playback Issues ?
There are many factors impacting the playback of video in a PCoIP environment. Factors that influence video playback are: PCoIP Thin Client or Software Client local hardware capabilities. PCoIP can require a lot of processing power not available on …
Knowledge Base Article Troubleshooting Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: September 3, 2023
4065
PCoIP display is 'blurry' and the image is of lower than expected quality
Problem When using PCoIP the display is 'blurry' or of low quality. The display may be persistently blurry or is blurry intermittently and slow.    Cause Typically a blurry screen is due to the lack of bandwidth. Throughout a PCoIP session, PCoIP network …
Knowledge Base Article Troubleshooting Performance Display Remote Workstation Card Zero Clients HP Anyware
Last modified: September 3, 2023
3825
What is an acceptable level of packet loss?
Just like VoIP and video conferencing, PCoIP is a real time protocol. Once a packet is lost in transit, there typically isn't time to re transmit before the PCoIP session is impacted. Therefore, the most acceptable level of loss is 0%. Packet loss maybe …
Knowledge Base Article Advisory Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: September 3, 2023
2730