Mirroring displays on PCoIP Zero Clients
Requirements Tera2 dual port client (TERA2321) Firmware 4.1 or newer   Instructions From the PCoIP Zero Client's onscreen display (OSD) or both versions of the Management Console OSD - browse to Options > Configuration > Display > Enable Display Cloning …
Knowledge Base Article Tutorial Display Zero Clients
Last modified: November 7, 2022
1253
Why does touchscreen calibration not work with a resolution other then native resolution?
Answer: Calibration for touchscreens via Teradici PCoIP firmware is designed to work from the OSD in native resolution with elo branded touch screens. To calibrate from a different resolution other than native, the elo device must be bridged and the elo …
Knowledge Base Article Advisory Display Zero Clients
Last modified: September 21, 2023
1016
What does the error message "Session Closed Remotely" mean?
There are a number or reasons that the message "Session Closed Remotely" appears during a brokered session listed below. Informational Messages Closed by login at an alternate location or host shutdown/restart User initiated logout Disconnected by …
Knowledge Base Article Advisory Session HP Anyware Remote Workstation Card Zero Clients
Last modified: December 9, 2022
1013
How do I change the image quality properties of a PCoIP Remote Workstation Card?
Review the below table to understand where to change the image quality properties in a remote workstation environment. This information applies to sessions between PCoIP Zero Clients and a PCoIP Remote Workstation Card (i.e. host card). If you are using a …
Knowledge Base Article Tutorial Performance Display Setup Zero Clients
Last modified: July 31, 2023
957
How many VMware View pools are supported by PCoIP Zero Clients?
PCoIP Zero Clients support up to 10 desktop pools when using Firmware 3.2.0 or earlier.  Firmware 3.3.0 and later increased support for the number of pools to 100. When more than 100 pools are configured, the PCoIP Zero Client becomes unresponsive for a …
Knowledge Base Article Advisory Third Party Enhancements Zero Clients
Last modified: September 14, 2023
953
Mouse cursor does not change when using PCoIP Zero Clients to connect to a VM using View Agent 7.4.
Scenario:  This is most visible in Office (especially MS Excel) application but occurs in applications or windows that require a cursor change such as changing the column widths in Excel. This event can be identified in the zero client log file with the …
Knowledge Base Article Troubleshooting Third Party Enhancements Zero Clients
Last modified: September 21, 2023
920
Why is my display not working correctly when using an adaptor attached to my OEM supplied cable?
Problem After purchasing a HP Anyware product you discover the cable shipped with the HP Anyware product does not have the necessary Video/Display connector to interface with your GPU or monitor. To complete the connection an adaptor is used to change the …
Knowledge Base Article Troubleshooting Display Setup Remote Workstation Card Zero Clients
Last modified: September 14, 2023
885
How do I configure a Peer-to-Peer Connection between a PCoIP Zero Client and a PCoIP Remote Workstation Card?
Requirements This article describes the configuration of a peer-to-peer, or dedicated connection between a PCoIP Zero Client and a PCoIP Remote Workstation Card including dual and quad display scenario's. Single or dual display requires a single PCoIP …
Knowledge Base Article Tutorial Session Setup Remote Workstation Card Zero Clients
Last modified: July 31, 2018
854
Where can I find the Imprivata OneSign Appliance verification setting on a PCoIP Zero Client?
Answer: The verification setting is located in the PCoIP Zero Client session tab under the Advanced settings. The OneSign Appliance Verification option will only appear in the Advanced options if the Session Connection Type is correctly selected as shown …
Knowledge Base Article Troubleshooting Session Security Zero Clients
Last modified: April 19, 2023
845