Teradici Documentation and Downloads | Documents and Downloads for Teradici products

Sort by

How do I check for packet loss on the ESX interface?

If there is packet loss on a PCoIP protocol session, but an analysis of network devices in the path show no loss and they have been properly configured (see Network session checklist for PCoIP protocol LAN and WAN deployments ) then you may want to …

What is a PCoIP Remote Workstation Card?

Answer: "PCoIP Remote Workstation Card" or "host card" or "hardware host" refers to Teradici's hardware implementation of a PCoIP protocol encoder. It's also used to refer to products that use the Teradici's hardware encoder including: PCI Express PCoIP …

Using HP Anyware PCoIP Zero Clients and Remote Workstation Cards on a direct-connect (no IP) network

Direct-connect (no IP network) configurations, sometimes incorrectly referred to as "home-run networks", refer to a direct connection between 2 devices without network switches/hubs installed using straight through cables via patch-panels. Although zero …

How to setup Windows Server 2008 R2 as an 802.1X Authentication Server.

The following guide shows an example Windows Server 2008 R2 configuration for use with the PCoIP Zero Client and PCoIP Remote Workstation Cards. The example sets up a brand new environment including a Active Directory Domain. It is recommended this …

Why does the "Source signal on other port" message appear on my display?

This indicates that a video source connected to the Host does not correspond with the video port used on the PCoIP Zero Client. This can be corrected by either swapping the video ports used on the Host or the PCoIP Zero Client. The following shows two …

What are the latency requirements for PCoIP?

PCoIP protocol itself is not sensitive to network latency, however network latency can impact the user experience. The network latency supported by products implementing PCoIP technology depends on the PCoIP host technology being used: PCoIP Remote …

End-of-Life Details: Tera1 Firmware

Overview This article provides notification that Teradici has begun the End-of-Life (EOL) process for Firmware for Tera1. This EOL notification applies to both Tera1 PCoIP Zero Clients and Tera1 PCoIP Remote Workstation Cards. Tera1-based products have …

What are the USB Transfer Types?

The Universal Serial Bus Specification defined four types of data transfer. Data transfer occurs between the memory buffer on the host computer, and an endpoint on the universal serial bus (USB) device. Data is organized into packets before it is …

FAQ - Licensing

This FAQ provides questions and answers on how to order, manage and troubleshoot licenses for PCoIP products FAQ - Purchasing Order : How can I purchase or obtain a license? Change Order : How can I change an existing order (split, merge, extend, renew, …

Unable to connect (0x1001) when a PCoIP Zero Client tries to connect to a PCoIP Remote Workstation Card

Problem When a PCoIP Zero Client is trying to connect to a PCoIP Remote Workstation Card. Clicking the connection button on the PCoIP Zero Client, the error message "Unable to connect (0x1001). Please contact your IT administrator" is returned Cause The …

Filter by Products

Filter by Topics

Search Knowledge Center

Filter by Products

Filter by Topics