What are the network maximum transmission unit (MTU) requirements for PCoIP?
PCoIP maximum transmission unit (MTU) Requirements Every network has a MTU that dictates the maximum size a individual network packet can be for transmission. If the packet is larger than the MTU it will be fragmented and sent as multiple packets or …
Knowledge Base Article Tutorial Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: September 3, 2023
6797
Troubleshooting out of order packets impacting the PCoIP protocol?
Problem The PCoIP session performance is poor. The logs indicate high packet loss and the error messages related to out of order packets. Note:The default PCoIP server logs will indicate when out of order mode is activated and deactivated. To see …
Knowledge Base Article Troubleshooting Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: September 3, 2023
5783
How do I check for packet loss on the ESX interface?
If there is packet loss on a PCoIP protocol session, but an analysis of network devices in the path show no loss and they have been properly configured (see  Network session checklist for PCoIP protocol LAN and WAN deployments ) then you may want to …
Knowledge Base Article Tutorial Performance Third Party Enhancements Remote Workstation Card
Last modified: September 3, 2023
5637
Using HP Anyware PCoIP Zero Clients and Remote Workstation Cards on a direct-connect (no IP) network
Direct-connect (no IP network) configurations, sometimes incorrectly referred to as "home-run networks", refer to a direct connection between 2 devices without network switches/hubs installed using straight through cables via patch-panels. Although zero …
Knowledge Base Article Tutorial Performance Setup Remote Workstation Card Zero Clients
Last modified: September 14, 2023
5180
Unable to connect (0x1001) when a PCoIP Zero Client tries to connect to a PCoIP Remote Workstation Card
Problem When a PCoIP Zero Client is trying to connect to a PCoIP Remote Workstation Card. Clicking the connection button on the PCoIP Zero Client, the error message "Unable to connect (0x1001). Please contact your IT administrator" is returned   Cause The …
Knowledge Base Article Troubleshooting Session Remote Workstation Card Zero Clients
Last modified: September 3, 2023
4189
How do I determine how much bandwidth a PCoIP Protocol Session is consuming?
There are multiple options to determine how much bandwidth a PCoIP protocol session is consuming.   Viewing live data on a PCoIP Zero Client or PCoIP Remote Workstation Card The active PCoIP protocol session bandwidth can be viewed in the PCoIP Zero …
Knowledge Base Article Advisory Performance HP Anyware Remote Workstation Card
Last modified: September 3, 2023
4068