What does "No Available Hosts for Connection" mean?
The message "No Available Hosts for Connection" appears if the PCoIP Zero Client has enabled the Host Discovery feature and tries to establish a session but cannot find a PCoIP Remote Workstation Card that is not currently in a session on the network. If …
Knowledge Base Article Troubleshooting Session Remote Workstation Card Zero Clients
Last modified: November 15, 2022
1534
Error block type is not 01 during 802.1x authentication
Problem When the PCoIP Zero Client has been configured for 802.1x authentication including loading the required certificates, the Network Access Controller is rejecting the authentication request with error messages such as The block type of the signature …
Knowledge Base Article Troubleshooting Security Remote Workstation Card Zero Clients
Last modified: September 15, 2023
1264
PCoIP Troubleshooting Steps: IEEE 802.1x Network Authentication
This article provides a brief list of troubleshooting steps for common issues with 802.1x authentication. It is not intended to be a comprehensive troubleshooting guide. These include scenarios for: Problems uploading IEEE 802.1x certificates to PCoIP …
Knowledge Base Article Troubleshooting Security Remote Workstation Card Zero Clients
Last modified: September 5, 2023
990
What does the error message "Session Closed Remotely" mean?
There are a number or reasons that the message "Session Closed Remotely" appears during a brokered session listed below. Informational Messages Closed by login at an alternate location or host shutdown/restart User initiated logout Disconnected by …
Knowledge Base Article Advisory Session HP Anyware Remote Workstation Card Zero Clients
Last modified: December 9, 2022
988
How do I tell which encryption method is being used for the PCoIP session?
PCoIP technology supports just AES-256-GCM encryption. Both methods of encryption - AES-128-GCM and Salsa20-256-round12 have been deprecated. The examples below are still valid when trying to determine which encryption method is being used. In viewing the …
Knowledge Base Article Advisory Security HP Anyware Remote Workstation Card Zero Clients
Last modified: December 4, 2023
934
Are there any limitations on physical distance for a PCoIP session?
Due to the design of PCoIP, using UDP for data transmission, PCoIP will operate over vast distances and network latencies up to 250 ms. PCoIP intelligently acknowledges the traffic inside the protocol allowing for high speed transmission over high latency …
Knowledge Base Article Tutorial Session Performance HP Anyware Remote Workstation Card
Last modified: May 22, 2024
885
How do I configure a Peer-to-Peer Connection between a PCoIP Zero Client and a PCoIP Remote Workstation Card?
Requirements This article describes the configuration of a peer-to-peer, or dedicated connection between a PCoIP Zero Client and a PCoIP Remote Workstation Card including dual and quad display scenario's. Single or dual display requires a single PCoIP …
Knowledge Base Article Tutorial Session Setup Remote Workstation Card Zero Clients
Last modified: July 31, 2018
839