I can't see or access PC/workstation BIOS when using a PCoIP Remote Workstation Card?
Problem When remotely access my a workstation using the PCoIP Remote Workstation Card, the BIOS is not visible remotely and when it is, can't be controlled.   Cause In order to access the BIOS when using a PCoIP Remote Workstation Card, the USB function …
How do I reset the configuration parameters entered on my PCoIP Zero Client or PCoIP Remote Workstation Card?
Answer: There are four ways to reset the PCoIP Zero Client to default settings which are described below. The PCoIP Remote Workstation card (also known as a PCoIP host card) has one reset procedure also described below. Some network information will be …
Why am I experiencing poor performance when playing a 1080p high fps video with my PCoIP Remote Workstation Card and PCoIP Software Client?
Problem When using the PCoIP Software Client to connect to a PCoIP Remote Workstation Card I cannot achieve high frame rate playback.   Cause There are a number of factors that can contribute to poor performance so the best method of trying to determine …
Troubleshooting artifacts in a PCoIP Session
Problem During a PCoIP Session artifacts are appearing on the screen. The artifacts may stay or slowly disappear.   Cause and Resolution There are may reasons artifacts may appear on the screen. Some may be source issues such as the application or …
Why is the BIOS not visible when my Dell workstation boots with a PCoIP Remote Workstation Card?
Scenario The BIOS on a Dell R5500/R5400 is not visible on boot up. After the OS loads, the monitor then displays the desktop. On some graphic cards, only the primary port is active during the POST phase of the host PC boot process. For example, when using …
Can a PCoIP Remote Workstation Card be brokered by VMware Horizon View?
A PCoIP Remote Workstation Card (host card) can be brokered by VMware View 4.5 and newer. This way, the host can be accessed by either a PCoIP Zero Client or the VMware View software client. Refer to  PCoIP Remote Workstation Card 4.9.0 Administrators' …
Why is my display not working correctly when using an adaptor attached to my OEM supplied cable?
Problem After purchasing a HP Anyware product you discover the cable shipped with the HP Anyware product does not have the necessary Video/Display connector to interface with your GPU or monitor. To complete the connection an adaptor is used to change the …
Can I connect a local monitor to computer that has PCoIP Remote Workstation Card or HP Anyware Installed?
Although you may have enough display heads on your GPU to connect local monitors, it is not a supported configuration when using a PCoIP Remote Workstation Card or HP Anyware. Connecting an additional local monitor may cause the following issues: Blank …