What are the requirements for USB 2.0 (EHCI) support on PCoIP Zero Clients?
Answer: EHCI (Enhanced Host Controller Interface) is a high-speed controller standard that is publicly documented and provides high speed USB functionality. Tera2 based PCoIP Clients support USB 2.0 (EHCI) out of the box on all firmware releases. The …
Knowledge Base Article Advisory Peripheral Devices Remote Workstation Card Zero Clients
Last modified: September 3, 2023
3710
Why does my mouse and keyboard not work when connecting to a HP Z420 or Z620 using a PCoIP Remote Workstation Card via a PCoIP Zero Client?
Answer: USB HID devices fail to initialize on PCoIP session start for HP Z420, Z620, Z820 workstations running BIOS 03.18 -3.68. HP has resolved the issue in BIOS release  03.69 Rev. A (9 May 2014). The BIOS file name is sp66326.exe. For more information …
Knowledge Base Article Troubleshooting Peripheral Devices Remote Workstation Card Zero Clients
Last modified: September 3, 2023
1768
How do I reset the configuration parameters entered on my PCoIP Zero Client or PCoIP Remote Workstation Card?
Answer: There are four ways to reset the PCoIP Zero Client to default settings which are described below. The PCoIP Remote Workstation card (also known as a PCoIP host card) has one reset procedure also described below. Some network information will be …
Knowledge Base Article Tutorial Management Setup Remote Workstation Card Zero Clients
Last modified: September 3, 2023
1624
How do I fix a problem with a USB mouse and keyboard not working on a Dell Precision R7610 workstation?
Answer: Dell fixed a known issue with the USB keyboard and mouse on Dell Precision R7610 workstations. The problem can happen on any Dell Precision workstation when connected to any PCoIP Zero Client. The issue was fixed in Dell BIOS A07. For more details …
Knowledge Base Article Troubleshooting Peripheral Devices Remote Workstation Card
Last modified: September 3, 2023
1556
What is the behaviour of the Mac Fn keys with the PCoIP Software Client?
Answer: When a Macbook is configured with use all Fx keys as standard function keys  and the client is in focus either in full screen or windowed mode: If Fn + Fx is pressed the function is interpreted locally (e.g. brightness adjustment) If Fx is pressed …
Knowledge Base Article Advisory Peripheral Devices HP Anyware
Last modified: September 3, 2023
1205
How to disable all USB devices but allow Human Interface Devices (HID) using the PCoIP Management Console
The PCoIP Management Console 1.x, 2.x and 3.x can push predetermined profiles to PCoIP Zero Clients and PCoIP Remote Workstation Cards. Inside the profile USB policies that control USB authorized and unauthorized devices. In many organizations it is …
Knowledge Base Article Tutorial Peripheral Devices Management Console Remote Workstation Card
Last modified: September 3, 2023
1198
Why is USB not working when connecting a PCoIP Zero Client to a PCoIP Remote Workstation Card?
By default, all USB devices are bridged to the host with the PCoIP Remote Workstation Card and is dependent on the host OS. Please verify the following Make sure the USB devices are not unauthorized in the PCoIP Remote Workstation Card or PCoIP Zero …
Knowledge Base Article Troubleshooting Peripheral Devices Remote Workstation Card Zero Clients
Last modified: September 3, 2023
1175
What types of USB devices are supported in Linux with the PCoIP Remote Workstation Card?
The Tera2 PCoIP Remote Workstation Card presents a Open Host Controller Interface (OHCI) and Enhanced Host Controller Interface (EHCI), supporting the USB 1.0 and USB 2.0 specifications respectively, via the PCIe 1x connector to the motherboard. If is up …
Knowledge Base Article Advisory Peripheral Devices Remote Workstation Card
Last modified: August 2, 2023
387