How do I upload firmware on PCoIP Zero Clients or PCoIP Remote Workstation Card?
This knowledge base article applies to using the Administrative Web Interface (AWI) as the tool used to upload firmware. To upload the firmware using the PCoIP Management Console, refer to Management Console 202x.x (or 1.10.x) administrators' guide and …
Knowledge Base Article Tutorial Setup Management Management Console Remote Workstation Card Zero Clients
Last modified: September 22, 2023
9106
What is monitor emulation on the PCoIP Remote Workstation Card and how does it work?
Answer: Monitor emulation is a feature on the PCoIP Remote Workstation Card (also known as a host card) that ensures graphics cards see a valid EDID on a Display Port or DVI port on boot. This helps prevent the graphics card from driving DVI signals or DP …
Knowledge Base Article Advisory Display Setup Remote Workstation Card
Last modified: September 3, 2023
2198
FAQ - What are the required TCP/UDP ports for PCoIP technology?
Answer: The TCP and UDP ports assigned for PCoIP technology are shown in the tables below. Please note that IANA assigned port 4172 to the PCoIP protocol. HP Anyware License Server HP Anyware License Server Port Port Number Direction Description Online …
Knowledge Base Article FAQ Setup HP Anyware Management Console Remote Workstation Card Zero Clients
Last modified: May 9, 2024
47669
Troubleshooting PCoIP session Connection Issues.
Problem When connecting to a PCoIP Standard Agent for Windows, PCoIP Graphics Agent for Windows, PCoIP Standard Agent for Linux or PCoIP Graphics Agent for Linux the connection fails with one of the following messages: Error: Unable to connect to …
Knowledge Base Article Troubleshooting Session HP Anyware Remote Workstation Card Zero Clients
Last modified: November 9, 2023
38547
Linux DHCP server configuration when using DHCP Discovery on PCoIP Management Console 2.x and 3.x
Answer: This is based on PCoIP Management Console 2.x and newer only This is an example of configuring a Linux DHCP server when using DHCP Option for device discovery. The DHCP server is configured by editing the configuration file: /etc/dhcpd.conf This …
Knowledge Base Article Tutorial Management Setup Management Console
Last modified: January 25, 2024
4513
Troubleshooting session disconnections
Problem PCoIP sessions are getting disconnected for no apparent reason. PCoIP session disconnections can be random events, occur after a certain time has elapsed or impact all PCoIP sessions at once or just one PCoIP session, either way they are …
Knowledge Base Article Troubleshooting Performance Session HP Anyware Remote Workstation Card Zero Clients
Last modified: December 2, 2023
9236
What are the jumpers and LEDs on the Tera2 PCoIP Remote Workstation Card used for?
All external connectors on Tera2 PCoIP host cards are for diagnostic purposes. Jumpers J15 and J25 are configurable and their functions are described below. If you want Tera1 jumper explanations instead, refer to  What are the jumpers on the Tera1 host …
Knowledge Base Article Troubleshooting Setup Remote Workstation Card
Last modified: April 17, 2024
2851
Host Session Health Check - Diagnostics and troubleshooting guide
Summary To receive a detailed host diagnostic report, create a host  support/log file bundle  and then submit this bundle to the PCoIP  health check   tool.  Once the files are submitted, it will take 5-10 minutes to produce a detailed report.  The report …
Knowledge Base Article Diagnostics Session Remote Workstation Card HP Anyware
Last modified: September 3, 2023
1615
DHCP IP address lease changes when the PCoIP Zero Client firmware or PCoIP Remote Workstation firrmware is upgraded
Problem Updating PCoIP Zero Client firmware or PCoIP Remote Workstation Card firmware results in a new DHCP IP address lease. The issue will only occur under the following circumstances: Updating a PCoIP Zero Client from firmware 4.7.1 and prior to 4.8.0 …
Knowledge Base Article Troubleshooting Setup Remote Workstation Card Zero Clients
Last modified: September 12, 2023
1853