License Activation with the PCoIP Management Console 2.x and 3.x fails with "ERROR: flxActAppActivationSend - (50041,41143,34)"
Problem License activation is failing with:  [root@localhost admin]# /opt/teradici/licensing/mc_activate_lic.sh -k 1234-5678-90AB-CDEF Activation Failed. Please verify your activation key. Running with debug output enabled (-d TRUE) may be helpful. …
Knowledge Base Article Troubleshooting Licensing Management Console
Last modified: September 3, 2023
1841
Can I connect a PCoIP Zero Clients and Remote Workstation Cards via wireless network?
There are a number of options to consider for wireless connection of PCoIP devices such as PCoIP Zero Clients and PCoIP Remote Workstation cards.  Wireless Access Point Use a wireless access point (wireless bridge) to connect a PCoIP Zero Client or PCoIP …
Knowledge Base Article Advisory Setup Remote Workstation Card Zero Clients
Last modified: September 4, 2023
1794
How do I enable NTP on PCoIP Zero Clients and PCoIP Remote Workstation Cards?
Enabling NTP is important on the PCoIP Zero Client and PCoIP Remote Workstation Card. NTP is using for the following: Setting the time and date of the PCoIP Zero Client and PCoIP Remote Workstation Card. As there is no battery on the devices, the time and …
Knowledge Base Article Tutorial Management Setup Management Console Zero Clients
Last modified: September 3, 2023
1736
How do I reset the configuration parameters entered on my PCoIP Zero Client or PCoIP Remote Workstation Card?
Answer: There are four ways to reset the PCoIP Zero Client to default settings which are described below. The PCoIP Remote Workstation card (also known as a PCoIP host card) has one reset procedure also described below. Some network information will be …
Knowledge Base Article Tutorial Management Setup Remote Workstation Card Zero Clients
Last modified: September 3, 2023
1614
Why is the BIOS not visible when my Dell workstation boots with a PCoIP Remote Workstation Card?
Scenario The BIOS on a Dell R5500/R5400 is not visible on boot up. After the OS loads, the monitor then displays the desktop. On some graphic cards, only the primary port is active during the POST phase of the host PC boot process. For example, when using …
Knowledge Base Article Troubleshooting Setup Display Remote Workstation Card
Last modified: September 3, 2023
1479
Can a PCoIP Remote Workstation Card be brokered by VMware Horizon View?
A PCoIP Remote Workstation Card (host card) can be brokered by VMware View 4.5 and newer. This way, the host can be accessed by either a PCoIP Zero Client or the VMware View software client. Refer to  PCoIP Remote Workstation Card 4.9.0 Administrators' …
Knowledge Base Article Advisory Setup Third Party Enhancements Remote Workstation Card
Last modified: September 12, 2023
1368