How much latency does PCoIP technology add to the remote system?
The latency added by PCoIP technology to a remote system is related to the time to encode (compression) and decode (decompression) for the PCoIP protocol, which depends on the implementation. Total end-to-end latency is determined by OS latency and …
Knowledge Base Article Advisory Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: July 28, 2023
1375
Host Performance Health Check - Diagnostics and troubleshooting guide
Summary To receive a detailed host diagnostic report, create a host agent  support/log file bundle  and then submit this bundle to the PCoIP  health check   tool.  Once the files are submitted, it will take 5-10 minutes to produce a detailed report.  The …
Knowledge Base Article Diagnostics Performance Remote Workstation Card HP Anyware
Last modified: June 28, 2024
1262
Determining why the PCoIP Zero Client was reset to factory default
Problem The PCoIP Zero Client unexpectedly reset to factory default.    Cause The PCoIP Zero Client would only reset to factory defaults if one of the reset options was used. The PCoIP Zero Client can be reset by the PCoIP Management Console, through the …
Knowledge Base Article Troubleshooting Management Management Console Zero Clients
Last modified: September 15, 2023
1108
Why are some Tera2 PCoIP Zero Clients showing the Online status as "False" in PCoIP Management Console 2.x and 3.x?
This indicates that the Tera 2 PCoIP Zero Client is not being managed by the PCoIP Management Console and can be one of several reasons: Not powered on Firmware has been downgraded to 4.x so no longer manageable by PCoIP Management Console 2.x and 3.x NTP …
Knowledge Base Article Troubleshooting Management Management Console Zero Clients
Last modified: September 3, 2023
1026
How to configure audio in a Linux workstation with a Tera1 or Tera2 Remote Workstation Card
Note: This knowledge base article covers older versions of Linux, newer modern versions Linux will automatically pick up the Audio device on the PCoIP Remote Workstation Card and activate the audio drivers. This knowledge base article has been made …
Knowledge Base Article Tutorial Performance Remote Workstation Card
Last modified: November 18, 2022
936
Random Session Disconnects due to Spanning Tree Configuration
Scenario PCoIP sessions experience random session disconnects of some or all clients. Re connection is not always possible straight away.   Cause A Spanning Tree Protocol (STP) re-calculation can cause random session disconnects. STP will cause the …
Knowledge Base Article Troubleshooting Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: December 9, 2022
908
What is the correct DNS and host file configuration for the Management Console 2.x and 3.x?
Under normal operation of the PCoIP Management Console 2.x and 3.x it is not necessary to modify the hosts file or the hostname. You should assign a static IP address to your PCoIP Management Console and create a DNS "A" record with the hostname and the …
Knowledge Base Article Troubleshooting Performance Management Console
Last modified: September 19, 2023
909
Are there any limitations on physical distance for a PCoIP session?
Due to the design of PCoIP, using UDP for data transmission, PCoIP will operate over vast distances and network latencies up to 250 ms. PCoIP intelligently acknowledges the traffic inside the protocol allowing for high speed transmission over high latency …
Knowledge Base Article Tutorial Session Performance HP Anyware Remote Workstation Card
Last modified: May 22, 2024
900