Why can I not see the mouse cursor when using PCoIP HP Anyware installed on Windows 8.1 or Windows 10 bare metal?
Problem When using PCoIP HP Anyware to connect to Windows 10 running on bare metal (operating system installed directly on the computer with no virtualization), the cursor is not visible.   Cause When Windows 10 do not detect a locally attached mouse, …
Knowledge Base Article Troubleshooting Display HP Anyware
Last modified: September 21, 2023
1021
Can I connect a local monitor to computer that has PCoIP Remote Workstation Card or HP Anyware Installed?
Although you may have enough display heads on your GPU to connect local monitors, it is not a supported configuration when using a PCoIP Remote Workstation Card or HP Anyware. Connecting an additional local monitor may cause the following issues: Blank …
Knowledge Base Article Advisory Display HP Anyware Remote Workstation Card
Last modified: July 31, 2023
853
Failed to install Virtual USB Hub: -500. Removing the HP Anyware PCoIP Agent for Windows Vhub component
Problem When installing the new agent you get the error at the top, "Installation Aborted. Setup was not completed successfully. The on screen install log contains the message "Failed to install Virtual USB Hub: -500".   Cause The HP Anyware USB Virtual …
Knowledge Base Article Troubleshooting Peripheral Devices Setup HP Anyware
Last modified: July 31, 2023
768
FAQ - Webcams Peripherals Device
How to troubleshoot Webcams Causes: Webcam will not work if  the webcam that you are using does not support USB 1.1. the webcam is connected to a USB 2.0 port internal/external USB hub and will present you error "USB device not supported behind a …
Knowledge Base Article FAQ Peripheral Devices HP Anyware
Last modified: September 21, 2023
748
What is the impact of minimum and maximum initial image quality on a PCoIP Session?
Minimum and maximum initial image quality sets the lower and upper quality level. The default values in HP Anyware is Q40 for the minimum initial image quality and Q80 for the maximum initial image quality. If PCoIP estimates there is adequate bandwidth …
Knowledge Base Article Advisory Display Performance Remote Workstation Card HP Anyware
Last modified: July 31, 2023
615
Should I use an initial image quality of Q100?
An initial image quality of Q100 will deliver the highest quality of image PCoIP can deliver. Q100 is not lossless, for a lossless image, build to lossless must be enabled.  How to configure the Turn off Build-to-Lossless feature session variable in GPO …
Knowledge Base Article Advisory Display Performance Remote Workstation Card Zero Clients HP Anyware
Last modified: August 1, 2023
597
Why does the PCoIP Zero Client OSD image quality preference slider not have any effect on PCoIP session?
Answer: Activation of the  Image Quality Preference slider requires enablement of the  check box found in the  Configure PCoIP image quality levels  ADM GPO variable shown below.   The Image Quality Preference slider (shown below) resides in the OSD under …
Knowledge Base Article Troubleshooting Display Performance Zero Clients HP Anyware
Last modified: August 2, 2023
437