What does the "i2c should be 0x03 on cable detect" PCoIP Zero Client event log error indicate?
Answer: Faulty cables interfere with the mechanisms in which PCoIP detects displays and can present a variety of errors. The i2c should be 0x03 on cable detect  PCoIP Zero Client log errors are usually indicative of faulty cables and occasionally of …
Knowledge Base Article Troubleshooting Zero Clients
Last modified: September 20, 2023
161
Management Console profile with blacklisted ciphers fails to apply to Remote Workstation Card
If a Management Console profile is configured to blacklist any of the following Remote Workstation Card ciphers, the profile application will fail on Remote Workstation Cards running firmware 21.01 or newer. TLS_RSA_WITH_AES_256_GCM_SHA384 …
Knowledge Base Article Troubleshooting Management Management Console
Last modified: September 3, 2023
142
Disable IPv6 in HP Anyware agent
IPv6 is enabled by default in HP Anyware agent starting agent 21.07 release.    Disable IPv6 (Only IPv4 connection is allowed)   Windows agent Open  Registry Editor .  Add registry value under   …
Knowledge Base Article Advisory Setup HP Anyware
Last modified: September 3, 2023
138
Registering HP Anyware Agents with Cloud License Server
Learning Objectives                                                                                                                                                                     Time Estimate                                                           …
Knowledge Base Article Tutorial Licensing HP Anyware
Last modified: September 3, 2023
129
Microsoft update to Full Enforcement Mode - impact to PCoIP Zero Client
Microsoft will implement Full Enforcement Mode of Certificate-based authentication changes on Windows domain controllers in February 2025. We have confirmed there will be no impact to PCoIP Zero Client users and smart card authentication will work even …
Knowledge Base Article Advisory Zero Clients Anyware Trusted Endpoints
Last modified: September 25, 2023
119
Why are some resolutions not available in the OSD but are listed as available in the PCoIP Zero Client Administrator's Guide?
This article is applicable to PCoIP Zero Clients that have DVI ports. To see all the supported resolutions in the OSD as listed in the PCoIP Zero Client Administrators' Guide ( GUI Reference > Configuring OSD Display Settings > OSD Dual-display: Display …
Knowledge Base Article Advisory Display Zero Clients
Last modified: September 3, 2023
115