PCoIP TROUBLESHOOTING STEPS: View Connection Server Client Certificates
This article provides a brief list of troubleshooting steps for common issues, it is not intended to be a comprehensive troubleshooting guide.  This includes scenarios and detailed troubleshooting steps as follows: Problems uploading VCS certificates to …
PCoIP TROUBLESHOOTING STEPS: VMware View Virtual desktop performance
This article provides a brief list of general troubleshooting steps for performance issues on virtual desktops. Scenarios covered include: Video slicing or tearing. Screen (or parts of the screen) becomes fuzzy screen and then clears up. Slow screen …
How to identify which USB port on my PCoIP Zero Client is behind an integrated/internal USB hub?
Scenario In some cases a user will plug a USB device into a port on a PCoIP Zero Client and the device will fail or not work as expected. This is caused when a USB hub is used between the USB peripheral and the PCoIP Zero Client root hub. This is not …
Why does my webcam or USB headset not work when connected to a PCoIP Zero Client at the same time?
Problem Your webcam and USB headset are connected to the PCoIP Zero Client at the same time and only one of the two works. When only one of the two devices is connected, it works as anticipated. In the example below, the Logitech USB Headset (901) is the …
How do I check for packet loss on the ESX interface?
If there is packet loss on a PCoIP protocol session, but an analysis of network devices in the path show no loss and they have been properly configured (see  Network session checklist for PCoIP protocol LAN and WAN deployments ) then you may want to …
Configuration of smart cards with PCoIP Zero Clients and VMWare Horizon
This article is provided to help administrators in setting up smart card authentication in zero clients connecting to VMWare Horizon. This article has been reviewed against the following supported hardware and software versions: VMware Horizon 7.2 PCoIP …
What are the requirements for USB 2.0 (EHCI) support on PCoIP Zero Clients?
Answer: EHCI (Enhanced Host Controller Interface) is a high-speed controller standard that is publicly documented and provides high speed USB functionality. Tera2 based PCoIP Clients support USB 2.0 (EHCI) out of the box on all firmware releases. The …
Why does the "USB device not authorized"message appear on my display?
This message indicates that an unauthorized USB device is attached to the PCoIP Zero Client. Be sure allowed USB devices are specified in the list of authorized devices and not in the list of unauthorized devices in the USB page of the PCoIP Zero Client's …