Troubleshooting artifacts in a PCoIP Session
Problem During a PCoIP Session artifacts are appearing on the screen. The artifacts may stay or slowly disappear.   Cause and Resolution There are may reasons artifacts may appear on the screen. Some may be source issues such as the application or …
Why can I not establish a PCoIP connection through my Palo Alto firewall?
Scenario With the PCoIP Transport Header enabled and using a Palo Alto firewall: PCoIP Zero Clients fail to open a session and show a black screen. The PCoIP Zero Client must be rebooted to get out of this state. Soft clients will only be able to connect …
What USB CD/DVD drives should I consider using with PCoIP Zero Clients?
Teradici does not maintain a list of tested units. With the introduction of EHCI (USB 2) functionality, compatibility with currently manufactured DVD brands has improved greatly, particularly when the PCoIP Zero Client or PCoIP Remote Workstation Card …
What is the behaviour of the Mac Fn keys with the PCoIP Software Client?
Answer: When a Macbook is configured with use all Fx keys as standard function keys  and the client is in focus either in full screen or windowed mode: If Fn + Fx is pressed the function is interpreted locally (e.g. brightness adjustment) If Fx is pressed …
How to disable all USB devices but allow Human Interface Devices (HID) using the PCoIP Management Console
The PCoIP Management Console 1.x, 2.x and 3.x can push predetermined profiles to PCoIP Zero Clients and PCoIP Remote Workstation Cards. Inside the profile USB policies that control USB authorized and unauthorized devices. In many organizations it is …
Do PCoIP Zero Clients support USB devices with a visible cursor, such as slate and scribe tablets when bridged to VMware Horizon View?
PCoIP Zero Clients support usb devices ( slate/scribe/pen tablets etc. ) but further configuration may be required. Scenario After connecting your device you can use the tablet for basic cursor movement and mouse click operations just like a regular …
Why is USB not working when connecting a PCoIP Zero Client to a PCoIP Remote Workstation Card?
By default, all USB devices are bridged to the host with the PCoIP Remote Workstation Card and is dependent on the host OS. Please verify the following Make sure the USB devices are not unauthorized in the PCoIP Remote Workstation Card or PCoIP Zero …
How to configure audio in a Linux workstation with a Tera1 or Tera2 Remote Workstation Card
Note: This knowledge base article covers older versions of Linux, newer modern versions Linux will automatically pick up the Audio device on the PCoIP Remote Workstation Card and activate the audio drivers. This knowledge base article has been made …