PCoIP TROUBLESHOOTING STEPS: View Connection Server Client Certificates
This article provides a brief list of troubleshooting steps for common issues, it is not intended to be a comprehensive troubleshooting guide.  This includes scenarios and detailed troubleshooting steps as follows: Problems uploading VCS certificates to …
What registry keys are required to make the Imprivata tap-in / tap-out functionality work with PCoIP Zero Clients?
Answer: If the Imprivata OneSign agent has been installed and a user cannot tap-in / tap-out, they should confirm if the registry key has been changed to enable this functionality. To do this the  RedirectionSupported registry key data value must be set …
How to identify which USB port on my PCoIP Zero Client is behind an integrated/internal USB hub?
Scenario In some cases a user will plug a USB device into a port on a PCoIP Zero Client and the device will fail or not work as expected. This is caused when a USB hub is used between the USB peripheral and the PCoIP Zero Client root hub. This is not …
Why does my webcam or USB headset not work when connected to a PCoIP Zero Client at the same time?
Problem Your webcam and USB headset are connected to the PCoIP Zero Client at the same time and only one of the two works. When only one of the two devices is connected, it works as anticipated. In the example below, the Logitech USB Headset (901) is the …
How to obtain the correct current certificate to upload to the PCoIP Zero Client certificate store in VMware Horizon View environments.
Background: This Knowledge Base article is limited to PCoIP Zero Clients in VMware Horizon View environments. The certificate(s) loaded on the PCoIP zero client ensures that the peer server it connects to is trusted. The certificate can be provided from a …
Configuration of smart cards with PCoIP Zero Clients and VMWare Horizon
This article is provided to help administrators in setting up smart card authentication in zero clients connecting to VMWare Horizon. This article has been reviewed against the following supported hardware and software versions: VMware Horizon 7.2 PCoIP …
How to setup Windows Server 2008 R2 as an 802.1X Authentication Server.
The following guide shows an example Windows Server 2008 R2 configuration for use with the PCoIP Zero Client and PCoIP Remote Workstation Cards. The example sets up a brand new environment including a Active Directory Domain. It is recommended this …
What are the requirements for USB 2.0 (EHCI) support on PCoIP Zero Clients?
Answer: EHCI (Enhanced Host Controller Interface) is a high-speed controller standard that is publicly documented and provides high speed USB functionality. Tera2 based PCoIP Clients support USB 2.0 (EHCI) out of the box on all firmware releases. The …