Why does the Password option not appear in the PCoIP Zero Client's OSD?
Problem When I log into the On Screen Display (OSD) on the PCoIP Zero Client, and then click the Options tab, the Password option does not appear.    Cause The password option was not shipped with your particular PCoIP device. Some PCoIP devices do ship …
Knowledge Base Article Tutorial Security Management Console Zero Clients
Last modified: September 3, 2023
728
What are my options for using PCoIP between trusted and untrusted networks?
PCoIP is encrypted by default and it cannot be disabled. This makes PCoIP itself secure on untrusted networks. To get PCoIP traffic from untrusted networks to PCoIP Hosts the following options can be used: Over a VPN that is UDP compatible. An SSL VPN …
Knowledge Base Article Advisory Security Performance HP Anyware
Last modified: September 3, 2023
718
My PCoIP Zero Clients at the remote location cannot connect to PCoIP Management Console 3.x
Problem PCoIP Zero Clients in remote locations are not connecting to the PCoIP Management Console 3.x   Cause This issue was tracked down to a setting in the PCoIP Management Console 3.x (MC). Check under Settings > Remote and confirm if you have entered …
Knowledge Base Article Troubleshooting Management Management Console
Last modified: November 7, 2022
646
How do I disable login username caching on a PCoIP Zero Client?
On a PCoIP Zero Client, username caching is set in the advanced options and can be disabled from the OSD Screen, the Administrative Web Interface (AWI), or the PCoIP Management Console.    From the OSD Screen: Under Options, select Configuration In the …
Knowledge Base Article Tutorial Setup Management Session Management Console Zero Clients
Last modified: September 3, 2023
577
Sample CentOS 7.4 DHCP configuration file for PCoIP Management Console auto discovery
The purpose of this tutorial is to provide a sample DHCP configuration for auto discovery of the PCoIP Management Console 2.x and newer. In this set up the following were deployed: CentOS 7.4 VM hosted on ESXi 5.5 server. Configured the CentOS VM with two …
Knowledge Base Article Tutorial Management Management Console
Last modified: December 11, 2018
563
Why is my 802.1x configuration failing on my older network?
Scenario 1 In an environment that contains legacy network equipment, after setting up 802.1x, initial authentication fails. The authentication switch does not respond to any of the EAP-TLS request packets from the PCoIP Zero Client.   Cause Some legacy …
Knowledge Base Article Troubleshooting Security Remote Workstation Card Zero Clients
Last modified: November 23, 2022
463