License Activation with the PCoIP Management Console 2.x and 3.x fails with "ERROR: flxActAppActivationSend - (50041,41143,34)"
Problem License activation is failing with:  [root@localhost admin]# /opt/teradici/licensing/mc_activate_lic.sh -k 1234-5678-90AB-CDEF Activation Failed. Please verify your activation key. Running with debug output enabled (-d TRUE) may be helpful. …
How to remove expired license from MC 2.x or 3.x to switch from Enterprise Edition to Standard Edition?
NOTE: If you are running Management Console 2.x or 3.x in Enterprise Edition and your license has expired you will not be able to log into the Management Console until you have either deactivated all your expired licenses or have activated new licenses. …
When does the PCoIP Management Console apply a resolution change using the Enable Preferred Resolution Override setting while in a PCoIP session?
In PCoIP Management Console (MC) 1.9.1 (and newer), PCoIP Zero Clients with firmware 4.1.2 (and newer) can be configured to override the attached monitors native resolution using the Enable Preferred Resolution Override feature. The setting is recognized …
PCoIP Management console 2.x or 3.x license activation fails with error "Operations error: 0 That activation request yields no right to a license".
Problem When you try to activate the PCoIP Management Console license with this command "/opt/teradici/licensing/mc_activate_lic.sh -k ", You get the error "Operations error: 0 That activation request yields no right to a license".   …
After activating a renewal license on my Management Console, it is showing the old expiry date, how do I fix?
Problem: I have renewed by license for the Management Console however after deactivating and reactivating the license on my Management Console, it is showing old expiry date.  Answer : To solve this issue you need to do the following steps: 1) Return the …
Recovering the OSD when the resolution was set to 800x600 or lower which removed functionality.
This occurs because these low resolutions do not display the OSD correctly, and access to some configurations are lost. Previously this was not an available feature which prevented devices being put into un-configurable states by setting resolutions to …