How to identify which USB port on my PCoIP Zero Client is behind an integrated/internal USB hub?
Scenario In some cases a user will plug a USB device into a port on a PCoIP Zero Client and the device will fail or not work as expected. This is caused when a USB hub is used between the USB peripheral and the PCoIP Zero Client root hub. This is not …
Knowledge Base Article Tutorial Peripheral Devices Zero Clients
Last modified: September 3, 2023
6672
Why does my webcam or USB headset not work when connected to a PCoIP Zero Client at the same time?
Problem Your webcam and USB headset are connected to the PCoIP Zero Client at the same time and only one of the two works. When only one of the two devices is connected, it works as anticipated. In the example below, the Logitech USB Headset (901) is the …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: September 3, 2023
5908
What are the requirements for USB 2.0 (EHCI) support on PCoIP Zero Clients?
Answer: EHCI (Enhanced Host Controller Interface) is a high-speed controller standard that is publicly documented and provides high speed USB functionality. Tera2 based PCoIP Clients support USB 2.0 (EHCI) out of the box on all firmware releases. The …
Knowledge Base Article Advisory Peripheral Devices Remote Workstation Card Zero Clients
Last modified: September 3, 2023
3688
Why does the "USB device not authorized"message appear on my display?
This message indicates that an unauthorized USB device is attached to the PCoIP Zero Client. Be sure allowed USB devices are specified in the list of authorized devices and not in the list of unauthorized devices in the USB page of the PCoIP Zero Client's …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: September 3, 2023
2902
What USB CD/DVD drives should I consider using with PCoIP Zero Clients?
Teradici does not maintain a list of tested units. With the introduction of EHCI (USB 2) functionality, compatibility with currently manufactured DVD brands has improved greatly, particularly when the PCoIP Zero Client or PCoIP Remote Workstation Card …
Knowledge Base Article Advisory Peripheral Devices Zero Clients
Last modified: September 3, 2023
1350
Do PCoIP Zero Clients support USB devices with a visible cursor, such as slate and scribe tablets when bridged to VMware Horizon View?
PCoIP Zero Clients support usb devices ( slate/scribe/pen tablets etc. ) but further configuration may be required. Scenario After connecting your device you can use the tablet for basic cursor movement and mouse click operations just like a regular …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: September 3, 2023
1189
Why is USB not working when connecting a PCoIP Zero Client to a PCoIP Remote Workstation Card?
By default, all USB devices are bridged to the host with the PCoIP Remote Workstation Card and is dependent on the host OS. Please verify the following Make sure the USB devices are not unauthorized in the PCoIP Remote Workstation Card or PCoIP Zero …
Knowledge Base Article Troubleshooting Peripheral Devices Remote Workstation Card Zero Clients
Last modified: September 3, 2023
1163
Why do USB 2.0 or isochronous devices fail to work as expected when plugged into a Samsung NC220 or NC240 PCoIP monitor?
Answer: This occurs because on the NC220 and NC240 monitor series, USB Ports 0, 1 and 2 are brought out directly and port 3 is connected to an internal hub. On this hub, 1 hub port is connected to a RS232 device, and another hub port is connected to an …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: November 21, 2022
616