What are the network maximum transmission unit (MTU) requirements for PCoIP?
PCoIP maximum transmission unit (MTU) Requirements Every network has a MTU that dictates the maximum size a individual network packet can be for transmission. If the packet is larger than the MTU it will be fragmented and sent as multiple packets or …
Knowledge Base Article Tutorial Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: September 3, 2023
6790
How to identify which USB port on my PCoIP Zero Client is behind an integrated/internal USB hub?
Scenario In some cases a user will plug a USB device into a port on a PCoIP Zero Client and the device will fail or not work as expected. This is caused when a USB hub is used between the USB peripheral and the PCoIP Zero Client root hub. This is not …
Knowledge Base Article Tutorial Peripheral Devices Zero Clients
Last modified: September 3, 2023
6651
How do I check for packet loss on the ESX interface?
If there is packet loss on a PCoIP protocol session, but an analysis of network devices in the path show no loss and they have been properly configured (see  Network session checklist for PCoIP protocol LAN and WAN deployments ) then you may want to …
Knowledge Base Article Tutorial Performance Third Party Enhancements Remote Workstation Card
Last modified: September 3, 2023
5591
PCoIP HP Anyware Webcam Support
USB Webcams are supported with Teradici HP Anyware when connecting to a PCoIP Agent for Windows. Webcams can be used with Microsoft Teams, Zoom, and other conferencing applications running on the remote desktop.   The models outlined in the table below …
Knowledge Base Article Tutorial Peripheral Devices HP Anyware
Last modified: October 4, 2023
5330
Using HP Anyware PCoIP Zero Clients and Remote Workstation Cards on a direct-connect (no IP) network
Direct-connect (no IP network) configurations, sometimes incorrectly referred to as "home-run networks", refer to a direct connection between 2 devices without network switches/hubs installed using straight through cables via patch-panels. Although zero …
Knowledge Base Article Tutorial Performance Setup Remote Workstation Card Zero Clients
Last modified: September 14, 2023
5178
How can I change USB authorizations for PCoIP Zero Client?
USB devices can be enabled or disabled which allows IT control of the use of peripherals with HP Anyware PCoIP Agent, VMware Horizon View using PCoIP protocol, or PCoIP Remote Workstation Cards. PCoIP Zero Clients provide unique USB security features that …
Knowledge Base Article Tutorial Management Peripheral Devices Security Remote Workstation Card Zero Clients
Last modified: September 3, 2023
3827
How can I configure USB authorizations for HP Anyware and PCoIP Software Client?
Configuring PCoIP Agent USB authorizations for HP Anyware   From HP Anyware release version  2.11 and newer ,  USB  redirection is enabled by default.  USB bridging, which enables USB devices to be used via a PCoIP Client on a HP Anyware PCoIP Agent , is …
Knowledge Base Article Tutorial Peripheral Devices Security HP Anyware
Last modified: September 3, 2023
3738