Teradici Documentation and Downloads | Documents and Downloads for Teradici products

Sort by

Setting Up Japanese Language and Keyboards

The following tutorial demonstrates how to set up Japanese language and keyboard for Windows PCoIP Software Client and connecting to Microsoft's Japanese Windows Server. Setting up language and keyboard is performed both on the host and client side. Note: …

À quoi sert l’adresse IP de secours ?

La carte PCoIP Zero Client ou PCoIP Remote Workstation est configurée sur ses paramètres d’usine par défaut. Par défaut, le périphérique PCoIP est en mode DHCP. Parce qu’il est en mode DHCP, lorsqu’il est connecté pour la première fois à un réseau, il …

What is the fallback IP address used for?

Out of the box, the PCoIP Zero Client or PCoIP Remote Workstation Card is configured to its factory default settings. By default, the PCoIP device is in DHCP mode. Because it is in DHCP mode, when it is first connected to a network, it tries to obtain a …

HP Anyware Instructions for Consumer Grade NVIDIA GPUs (e.g. GeForce RTX 2080)

Overview The purpose of this document is to outline key components, installation instructions and important notes of HP Anyware on physical workstations with consumer grade NVIDIA GPUs. NOTE: This document is intended for NVIDIA consumer grade GPUs. …

How do I upload firmware on PCoIP Zero Clients or PCoIP Remote Workstation Card?

This knowledge base article applies to using the Administrative Web Interface (AWI) as the tool used to upload firmware. To upload the firmware using the PCoIP Management Console, refer to Management Console 202x.x (or 1.10.x) administrators' guide and …

How do I find the IP address of my newly installed PCoIP Zero Client or PCoIP Remote Workstation card?

Answer: You can determine the IP address associated with your device using one of the following methods: Before you begin, write down the MAC address of the device you want to determine the IP address of. For most of these methods, the MAC address is …

How do I set the verbosity level for PCoIP Agent log entries?

For HP Anyware, Amazon Workspaces, and Horizon View 5.2+: When changing the verbosity level for the PCoIP Agent, the logging level for all components are changed. Configuring the verbosity level in Windows The log verbosity for PCoIP Windows log files …

Knowledge Base Article Tutorial Setup HP Anyware

Last modified: September 3, 2023

6768

HP Anyware Instructions for Standalone Computers

Overview The purpose of this document is to outline key components, installation instructions and important notes of HP Anyware on standalone computers without discrete GPUs. Although standalone physical PCs are currently not tested, they are expected to …

Knowledge Base Article Tutorial Setup HP Anyware

Last modified: January 16, 2024

6220

Sample nginx configuration for proxy when using remote device management

This is a sample configuration when using a NGINX version 1.14.1 reverse proxy. It was used for a NGINX system installed on Rocky Linux 8. You will be required to modify the highlighted unique fields for your environment. Other reverse proxy systems may …

How do I check for packet loss on the ESX interface?

If there is packet loss on a PCoIP protocol session, but an analysis of network devices in the path show no loss and they have been properly configured (see Network session checklist for PCoIP protocol LAN and WAN deployments ) then you may want to …

Filter by Products

Filter by Topics

Search Knowledge Center

Filter by Products

Filter by Topics