Teradici Documentation and Downloads | Documents and Downloads for Teradici products

Sort by

What registry keys are required to make the Imprivata tap-in / tap-out functionality work with PCoIP Zero Clients?

Answer: If the Imprivata OneSign agent has been installed and a user cannot tap-in / tap-out, they should confirm if the registry key has been changed to enable this functionality. To do this the RedirectionSupported registry key data value must be set …

Tools for PCoIP Protocol Deployments

This article provides links to tools that can be used for planning or troubleshooting HP Anyware, PCoIP Remote Workstation Card, Amazon Workspaces, and VMware Horizon View PCoIP deployments. Network Bandwidth Calculator Useful for network bandwidth …

What are the network maximum transmission unit (MTU) requirements for PCoIP?

PCoIP maximum transmission unit (MTU) Requirements Every network has a MTU that dictates the maximum size a individual network packet can be for transmission. If the packet is larger than the MTU it will be fragmented and sent as multiple packets or …

How do I check for packet loss on the ESX interface?

If there is packet loss on a PCoIP protocol session, but an analysis of network devices in the path show no loss and they have been properly configured (see Network session checklist for PCoIP protocol LAN and WAN deployments ) then you may want to …

Configuration of smart cards with PCoIP Zero Clients and VMWare Horizon

This article is provided to help administrators in setting up smart card authentication in zero clients connecting to VMWare Horizon. This article has been reviewed against the following supported hardware and software versions: VMware Horizon 7.2 PCoIP …

Using HP Anyware PCoIP Zero Clients and Remote Workstation Cards on a direct-connect (no IP) network

Direct-connect (no IP network) configurations, sometimes incorrectly referred to as "home-run networks", refer to a direct connection between 2 devices without network switches/hubs installed using straight through cables via patch-panels. Although zero …

How do I set up or override PCoIP Software Session Variables?

PCoIP Software session variables provide an easy and flexible way for administrators to tune and configure a PCoIP session if required. HP Anyware PCoIP Agent There are two PCoIP group policy object template files in PCoIP Agent version 2.11 onwards. …

PCoIP Audio quality and bandwidth

PCoIP Audio Features 2 channel Stereo audio Automatic quality adjustment to fit inside the available PCoIP session bandwidth Audio In and Audio Out via the HP Anyware Audio Driver included in the HP Anyware or ALC888 equivalent audio in the PCoIP Remote …

How to use the packet capture utility in PCoIP Zero Client Firmware

Since many customers are unlikely to have access to a port mirroring switch, a new packet capture feature was added in firmware 4.7.0. It is designed to assist with troubleshooting Unified Communications issues. Note: The packet capture utility will not …

How to configure the PCoIP MTU Size variable

PCoIP Software Session Variables provide an easy and flexible way for administrators to tune and configure a PCoIP session if required. This article discusses changing the PCoIP session MTU size. Decreasing the MTU size may only be required if PCoIP …

Knowledge Base Article Tutorial Session Setup HP Anyware

Last modified: September 4, 2023

1946

Filter by Products

Filter by Topics

Search Knowledge Center

Filter by Products

Filter by Topics