How do I upload firmware on PCoIP Zero Clients or PCoIP Remote Workstation Card?
This knowledge base article applies to using the Administrative Web Interface (AWI) as the tool used to upload firmware. To upload the firmware using the PCoIP Management Console, refer to Management Console 202x.x (or 1.10.x) administrators' guide and …
What registry keys are required to make the Imprivata tap-in / tap-out functionality work with PCoIP Zero Clients?
Answer: If the Imprivata OneSign agent has been installed and a user cannot tap-in / tap-out, they should confirm if the registry key has been changed to enable this functionality. To do this the  RedirectionSupported registry key data value must be set …
How to identify which USB port on my PCoIP Zero Client is behind an integrated/internal USB hub?
Scenario In some cases a user will plug a USB device into a port on a PCoIP Zero Client and the device will fail or not work as expected. This is caused when a USB hub is used between the USB peripheral and the PCoIP Zero Client root hub. This is not …
Sample nginx configuration for proxy when using remote device management
This is a sample configuration when using a NGINX version 1.14.1 reverse proxy. It was used for a NGINX system installed on Rocky Linux 8. You will be required to modify the highlighted unique fields for your environment. Other reverse proxy systems may …
PCoIP HP Anyware Webcam Support
USB Webcams are supported with Teradici HP Anyware when connecting to a PCoIP Agent for Windows. Webcams can be used with Microsoft Teams, Zoom, and other conferencing applications running on the remote desktop.   The models outlined in the table below …
Configuration of smart cards with PCoIP Zero Clients and VMWare Horizon
This article is provided to help administrators in setting up smart card authentication in zero clients connecting to VMWare Horizon. This article has been reviewed against the following supported hardware and software versions: VMware Horizon 7.2 PCoIP …
Linux DHCP server configuration when using DHCP Discovery on PCoIP Management Console 2.x and 3.x
Answer: This is based on PCoIP Management Console 2.x and newer only This is an example of configuring a Linux DHCP server when using DHCP Option for device discovery. The DHCP server is configured by editing the configuration file: /etc/dhcpd.conf This …