How do I check for packet loss on the ESX interface?
If there is packet loss on a PCoIP protocol session, but an analysis of network devices in the path show no loss and they have been properly configured (see  Network session checklist for PCoIP protocol LAN and WAN deployments ) then you may want to …
Knowledge Base Article Tutorial Performance Third Party Enhancements Remote Workstation Card
Last modified: September 3, 2023
6066
Sample nginx configuration for proxy when using remote device management
This is a sample configuration when using a NGINX version 1.14.1 reverse proxy. It was used for a NGINX system installed on Rocky Linux 8. You will be required to modify the highlighted unique fields for your environment. Other reverse proxy systems may …
Knowledge Base Article Tutorial Management Setup Management Console
Last modified: April 25, 2024
5937
How to obtain the correct current certificate to upload to the PCoIP Zero Client certificate store in VMware Horizon View environments.
Background: This Knowledge Base article is limited to PCoIP Zero Clients in VMware Horizon View environments. The certificate(s) loaded on the PCoIP zero client ensures that the peer server it connects to is trusted. The certificate can be provided from a …
Knowledge Base Article Tutorial Security Zero Clients
Last modified: September 3, 2023
5738
PCoIP HP Anyware Webcam Support
USB Webcams are supported with HP Anyware when connecting to a PCoIP Agent for Windows. Webcams can be used with Microsoft Teams, Zoom, and other conferencing applications running on the remote desktop.   The models outlined in the table below are …
Knowledge Base Article Tutorial Peripheral Devices HP Anyware
Last modified: June 6, 2024
5465
Configuration of smart cards with PCoIP Zero Clients and VMWare Horizon
This article is provided to help administrators in setting up smart card authentication in zero clients connecting to VMWare Horizon. This article has been reviewed against the following supported hardware and software versions: VMware Horizon 7.2 PCoIP …
Knowledge Base Article Tutorial Session Security Setup Third Party Enhancements Zero Clients
Last modified: September 3, 2023
5329
Using HP Anyware PCoIP Zero Clients and Remote Workstation Cards on a direct-connect (no IP) network
Direct-connect (no IP network) configurations, sometimes incorrectly referred to as "home-run networks", refer to a direct connection between 2 devices without network switches/hubs installed using straight through cables via patch-panels. Although zero …
Knowledge Base Article Tutorial Performance Setup Remote Workstation Card Zero Clients
Last modified: September 14, 2023
5203
How to setup Windows Server 2008 R2 as an 802.1X Authentication Server.
The following guide shows an example Windows Server 2008 R2 configuration for use with the PCoIP Zero Client and PCoIP Remote Workstation Cards. The example sets up a brand new environment including a Active Directory Domain. It is recommended this …
Knowledge Base Article Tutorial Security Remote Workstation Card Zero Clients
Last modified: September 3, 2023
5174
Linux DHCP server configuration when using DHCP Discovery on PCoIP Management Console 2.x and 3.x
Answer: This is based on PCoIP Management Console 2.x and newer only This is an example of configuring a Linux DHCP server when using DHCP Option for device discovery. The DHCP server is configured by editing the configuration file: /etc/dhcpd.conf This …
Knowledge Base Article Tutorial Management Setup Management Console
Last modified: January 25, 2024
4585
How can I change USB authorizations for PCoIP Zero Client?
USB devices can be enabled or disabled which allows IT control of the use of peripherals with HP Anyware PCoIP Agent, VMware Horizon View using PCoIP protocol, or PCoIP Remote Workstation Cards. PCoIP Zero Clients provide unique USB security features that …
Knowledge Base Article Tutorial Management Peripheral Devices Security Remote Workstation Card Zero Clients
Last modified: September 3, 2023
3887
How can I configure USB authorizations for HP Anyware and PCoIP Software Client?
Configuring PCoIP Agent USB authorizations for HP Anyware   From HP Anyware release version  2.11 and newer ,  USB  redirection is enabled by default.  USB bridging, which enables USB devices to be used via a PCoIP Client on a HP Anyware PCoIP Agent , is …
Knowledge Base Article Tutorial Peripheral Devices Security HP Anyware
Last modified: September 3, 2023
3871