HP Anyware Manager POC Basic Setup
HP Anyware Manager POC Setup This KB article provides an overview of HP Anyware Manager once it is setup using the quick start provisioning scripts located here:  https://github.com/teradici/cloud_deployment_scripts . This article outlines how to sign …
How do I change the image quality properties of a PCoIP Remote Workstation Card?
Review the below table to understand where to change the image quality properties in a remote workstation environment. This information applies to sessions between PCoIP Zero Clients and a PCoIP Remote Workstation Card (i.e. host card). If you are using a …
Configuring and Installing External MongoDB and Vault using self-signed TLS Certificates
Overview The purpose of this document is to provide one-stop instructions of how to install and configure a instance of MongoDB and a instance of Vault on the same VM with the simplest single host deployment. This can be served as the pre-requisites steps …
How to configure audio in a Linux workstation with a Tera1 or Tera2 Remote Workstation Card
Note: This knowledge base article covers older versions of Linux, newer modern versions Linux will automatically pick up the Audio device on the PCoIP Remote Workstation Card and activate the audio drivers. This knowledge base article has been made …
Are there any limitations on physical distance for a PCoIP session?
Due to the design of PCoIP, using UDP for data transmission, PCoIP will operate over vast distances and network latencies up to 250 ms. PCoIP intelligently acknowledges the traffic inside the protocol allowing for high speed transmission over high latency …
How to change the Active Directory (AD) password when using Imprivata OneSign.
Scenario 1: A user's password is reset via the AD by the administrator. When the user taps the proximity card to login via OneSign, the PCoIP Zero Client shows the message that the credentials are invalid. Scenario 2: When a user taps the proximity card …
How to remove expired license from MC 2.x or 3.x to switch from Enterprise Edition to Standard Edition?
NOTE: If you are running Management Console 2.x or 3.x in Enterprise Edition and your license has expired you will not be able to log into the Management Console until you have either deactivated all your expired licenses or have activated new licenses. …