How to create and install a self-signed certificate on a Windows 2016 Active Directory server to enable LDAPS
NOTE:  Self-signed certificates are not inherently secure and should not be used in production environments. Please consult your security infrastructure and security policies before installing a self-signed certificate. This is an example of one method to …
How do I upload firmware on PCoIP Zero Clients or PCoIP Remote Workstation Card?
This knowledge base article applies to using the Administrative Web Interface (AWI) as the tool used to upload firmware. To upload the firmware using the PCoIP Management Console, refer to Management Console 202x.x (or 1.10.x) administrators' guide and …
Sample nginx configuration for proxy when using remote device management
This is a sample configuration when using a NGINX version 1.14.1 reverse proxy. It was used for a NGINX system installed on Rocky Linux 8. You will be required to modify the highlighted unique fields for your environment. Other reverse proxy systems may …
Linux DHCP server configuration when using DHCP Discovery on PCoIP Management Console 2.x and 3.x
Answer: This is based on PCoIP Management Console 2.x and newer only This is an example of configuring a Linux DHCP server when using DHCP Option for device discovery. The DHCP server is configured by editing the configuration file: /etc/dhcpd.conf This …
How do I enable NTP on PCoIP Zero Clients and PCoIP Remote Workstation Cards?
Enabling NTP is important on the PCoIP Zero Client and PCoIP Remote Workstation Card. NTP is using for the following: Setting the time and date of the PCoIP Zero Client and PCoIP Remote Workstation Card. As there is no battery on the devices, the time and …
How do I enable IEEE 802.1x Network Authentication in PCoIP Zero Clients and PCoIP Remote Workstation Cards?
1) Identify the certificates used for IEEE 802.1x network authentication in your organization 2) Ensure that the certificates are properly formatted Certificates must be in .PEM format and less than 6 KB Both a client certificate and a server root CA …
Why does the Password option not appear in the PCoIP Zero Client's OSD?
Problem When I log into the On Screen Display (OSD) on the PCoIP Zero Client, and then click the Options tab, the Password option does not appear.    Cause The password option was not shipped with your particular PCoIP device. Some PCoIP devices do ship …