Teradici Documentation and Downloads | Documents and Downloads for Teradici products

Sort by

Setting Up Japanese Language and Keyboards

The following tutorial demonstrates how to set up Japanese language and keyboard for Windows PCoIP Software Client and connecting to Microsoft's Japanese Windows Server. Setting up language and keyboard is performed both on the host and client side. Note: …

À quoi sert l’adresse IP de secours ?

La carte PCoIP Zero Client ou PCoIP Remote Workstation est configurée sur ses paramètres d’usine par défaut. Par défaut, le périphérique PCoIP est en mode DHCP. Parce qu’il est en mode DHCP, lorsqu’il est connecté pour la première fois à un réseau, il …

What is the fallback IP address used for?

Out of the box, the PCoIP Zero Client or PCoIP Remote Workstation Card is configured to its factory default settings. By default, the PCoIP device is in DHCP mode. Because it is in DHCP mode, when it is first connected to a network, it tries to obtain a …

How do I bridge a USB device on a PCoIP Zero Client?

PCoIP Zero Clients locally terminate HID USB devices when connecting to: VMware View virtual desktops, or PCoIP Remote Workstation Cards (host cards) on systems where the PCoIP Host Software is installed and the Local Cursor and Keyboard feature is …

How do I upload firmware on PCoIP Zero Clients or PCoIP Remote Workstation Card?

This knowledge base article applies to using the Administrative Web Interface (AWI) as the tool used to upload firmware. To upload the firmware using the PCoIP Management Console, refer to Management Console 202x.x (or 1.10.x) administrators' guide and …

How do I find the IP address of my newly installed PCoIP Zero Client or PCoIP Remote Workstation card?

Answer: You can determine the IP address associated with your device using one of the following methods: Before you begin, write down the MAC address of the device you want to determine the IP address of. For most of these methods, the MAC address is …

How to identify which USB port on my PCoIP Zero Client is behind an integrated/internal USB hub?

Scenario In some cases a user will plug a USB device into a port on a PCoIP Zero Client and the device will fail or not work as expected. This is caused when a USB hub is used between the USB peripheral and the PCoIP Zero Client root hub. This is not …

Configuration of smart cards with PCoIP Zero Clients and VMWare Horizon

This article is provided to help administrators in setting up smart card authentication in zero clients connecting to VMWare Horizon. This article has been reviewed against the following supported hardware and software versions: VMware Horizon 7.2 PCoIP …

Using HP Anyware PCoIP Zero Clients and Remote Workstation Cards on a direct-connect (no IP) network

Direct-connect (no IP network) configurations, sometimes incorrectly referred to as "home-run networks", refer to a direct connection between 2 devices without network switches/hubs installed using straight through cables via patch-panels. Although zero …

Using a custom display resolution and the Hot Plug Reset function on a PCoIP Zero Client

Setting a custom display resolution A PCoIP Zero Client allows you to set a custom display resolution on the client, which is saved even when the client is powered down. This lets you set a resolution that is different than the attached display's native …

Filter by Products

Filter by Topics

Search Knowledge Center

Filter by Products

Filter by Topics