Teradici Documentation and Downloads | Documents and Downloads for Teradici products

Sort by

How can I shadow a VMware Horizon View PCoIP desktop session from my vSphere console?

Note: This knowledge base article does not apply to HP Anyware. HP Anyware uses a Anyware software GPU or a hardware GPU disabling the vSphere Console. In some cases viewing a remote users PCoIP session may be beneficial to troubleshooting an issue. In …

PCoIP Audio quality and bandwidth

PCoIP Audio Features 2 channel Stereo audio Automatic quality adjustment to fit inside the available PCoIP session bandwidth Audio In and Audio Out via the HP Anyware Audio Driver included in the HP Anyware or ALC888 equivalent audio in the PCoIP Remote …

How does the PCoIP Zero Client/PCoIP Remote Workstation Card support remote power management?

Answer: This article describes how to remotely power down a host PC/workstation with a PCoIP Remote Workstation Card (i.e. host card) installed, and how to remotely power it up with wake on LAN (WOL). Note: VMWare View brokered connections do not support …

How to use the packet capture utility in PCoIP Zero Client Firmware

Since many customers are unlikely to have access to a port mirroring switch, a new packet capture feature was added in firmware 4.7.0. It is designed to assist with troubleshooting Unified Communications issues. Note: The packet capture utility will not …

How do I enable NTP on PCoIP Zero Clients and PCoIP Remote Workstation Cards?

Enabling NTP is important on the PCoIP Zero Client and PCoIP Remote Workstation Card. NTP is using for the following: Setting the time and date of the PCoIP Zero Client and PCoIP Remote Workstation Card. As there is no battery on the devices, the time and …

How do I gather PCoIP client logs for the HP t410 (and change its logging verbosity)?

The HP t410 Smart Zero Client uses Teradici's PCoIP software. The PCoIP client logs are accessible on a HP t410 client through the on-screen-display. A bundle of log files can be saved to a local USB flash drive connected to the t410 client using the …

Knowledge Base Article Tutorial Setup Zero Clients

Last modified: July 27, 2023

1674

Workstation Remote Power Off

Remote power On Tera2 based PCoIP Zero Clients, the remote power off function can be access by pushing the power button briefly. This will bring up an on screen menu that can be cycled via the power button. The only power function available is Workstation …

How do I reset the configuration parameters entered on my PCoIP Zero Client or PCoIP Remote Workstation Card?

Answer: There are four ways to reset the PCoIP Zero Client to default settings which are described below. The PCoIP Remote Workstation card (also known as a PCoIP host card) has one reset procedure also described below. Some network information will be …

How do I configure my 4 monitors in the PCoIP Zero Client OSD?

To configure 4 monitors to your preference, follow the steps below. Before you begin, make sure that you know what monitor is connected to what PCoIP Zero Client port number. From the onscreen display (OSD) of your PCoIP Zero Client, browse to Options > …

How can I determine the frame rate at a PCoIP protocol client?

Answer: There are a multiple ways to determine the frame update rate displayed at the PCoIP Zero Client. Note: the frame rate displayed at the client this may be different than the source display frame rate when in a congested network environment. Log …

Filter by Products

Filter by Topics

Search Knowledge Center

Filter by Products

Filter by Topics