How do I upload firmware on PCoIP Zero Clients or PCoIP Remote Workstation Card?
This knowledge base article applies to using the Administrative Web Interface (AWI) as the tool used to upload firmware. To upload the firmware using the PCoIP Management Console, refer to Management Console 202x.x (or 1.10.x) administrators' guide and …
Certificate management for PCoIP Zero Clients and PCoIP Remote Workstation Cards
This article provides a high level overview of certificate management for PCoIP Zero Clients and PCoIP Remote Workstation Cards (also known as PCoIP host cards). Note: PCoIP Zero Clients and PCoIP Remote Workstation Cards are highly secure devices and by …
What registry keys are required to make the Imprivata tap-in / tap-out functionality work with PCoIP Zero Clients?
Answer: If the Imprivata OneSign agent has been installed and a user cannot tap-in / tap-out, they should confirm if the registry key has been changed to enable this functionality. To do this the  RedirectionSupported registry key data value must be set …
How do I find the IP address of my newly installed PCoIP Zero Client or PCoIP Remote Workstation card?
Answer: You can determine the IP address associated with your device using one of the following methods: Before you begin, write down the MAC address of the device you want to determine the IP address of. For most of these methods, the MAC address is …
How to obtain the correct current certificate to upload to the PCoIP Zero Client certificate store in VMware Horizon View environments.
Background: This Knowledge Base article is limited to PCoIP Zero Clients in VMware Horizon View environments. The certificate(s) loaded on the PCoIP zero client ensures that the peer server it connects to is trusted. The certificate can be provided from a …
Configuration of smart cards with PCoIP Zero Clients and VMWare Horizon
This article is provided to help administrators in setting up smart card authentication in zero clients connecting to VMWare Horizon. This article has been reviewed against the following supported hardware and software versions: VMware Horizon 7.2 PCoIP …
Using HP Anyware PCoIP Zero Clients and Remote Workstation Cards on a direct-connect (no IP) network
Direct-connect (no IP network) configurations, sometimes incorrectly referred to as "home-run networks", refer to a direct connection between 2 devices without network switches/hubs installed using straight through cables via patch-panels. Although zero …