Teradici Documentation and Downloads | Documents and Downloads for Teradici products

Sort by

PCoIP Zero Client Display Topology Alignment settings

The Alignment setting in the OSD Display Topology tab is designed to work with 2 or more monitors with different resolutions. It is also designed to work if one of the two monitors with identical resolutions is rotated to portrait mode. The Alignment …

Knowledge Base Article Tutorial Display Zero Clients

Last modified: November 8, 2022

476

Configuring PCoIP Clients

After completing this unit, you’ll be able to: Understand the requirements for using configurations Understand the procedure to configure client machine 40 mins Configuring Soft Clients PCoIP clients can be configured to allow you to set different user …

Knowledge Base Article Tutorial Setup HP Anyware

Last modified: September 3, 2023

430

How do I disable build-to-lossless on a Remote Workstation Card?

Answer: You can disable the build-to-lossless feature using the Administrative Web Interface (AWI) or the PCoIP Management Console. To do this using the AWI, follow the steps below. For more information, or to disable this feature using the PCoIP …

What is Standalone mode?

Answer: Standalone mode lets a Tera1 PCoIP Remote Workstation Card operate without installation in a PCIe slot. In Standalone mode, the PCoIP Remote Workstation Card is powered from a floppy drive (+5V/+12V) power connector instead of from a PCIe slot. …

Requirements for the Leostream broker to automatically detect a PCoIP Remote Workstation Card?

Requirements For the Leostream broker to automatically detect a Remote Workstation Card the following components must be installed: PCoIP Remote Workstation Card inserted in the host PC Leostream Connection Broker 7.7 or newer Leostream Agent 5.5.95 or …

How long does it take a proximity reader to enumerate?

The proximity readers that have been tested with PCoIP Zero Clients typically enumerate in under 5 seconds; however, there can be exceptions. RF Ideas Air ID 82 Series RDR-7L82AKU (LEGIC-Prime only) proximity reader has been seen to take longer and is …

Configure HP Anyware Event Log Verbosity

HP Anyware event log verbosity (level) can be configured on both the client and agent software. PCoIP Software Client for Windows: http://www.teradici.com/web-help/pcoip_client/windows/current/#Topics/Troubleshooting.htm?Highlight=Setting%20Log%20Levels …

Knowledge Base Article Tutorial Setup HP Anyware

Last modified: September 3, 2023

296

How can I tell if the 802.1x certificate uploaded successfully?

A good test is to use the web UI to upload the 802.1x certificate. From the web UI, go to Upload> Certificate and view the screen. If the certificate is listed after a restart of the PCoIP Zero Client then the certificate was uploaded successfully (see …

How do I configure wake-on-LAN with the AMD R5000 PCoIP Remote Workstation Card?

There are three ways to configure wake-on-LAN with the AMD R5000 PCoIP Remote Workstation Card. Option 1: Use the PC NIC and PCoIP Host Software For instructions, refer to How do I remotely power on the host PC/workstation through its network interface …

When the network experiences periods of high congestion what will happen to the users experience?

PCoIP will adjust to the network conditions to deliver the best PCoIP experience possible, for the given network conditions, for the user. During periods of congestion the user experience: A blurry or compressed image Momentary block screens Stuttering …

Filter by Products

Filter by Topics

Search Knowledge Center

Filter by Products

Filter by Topics