Mirroring displays on PCoIP Zero Clients
Requirements Tera2 dual port client (TERA2321) Firmware 4.1 or newer   Instructions From the PCoIP Zero Client's onscreen display (OSD) or both versions of the Management Console OSD - browse to Options > Configuration > Display > Enable Display Cloning …
How to disable all USB devices but allow Human Interface Devices (HID) using the PCoIP Management Console
The PCoIP Management Console 1.x, 2.x and 3.x can push predetermined profiles to PCoIP Zero Clients and PCoIP Remote Workstation Cards. Inside the profile USB policies that control USB authorized and unauthorized devices. In many organizations it is …
How do I enable IEEE 802.1x Network Authentication in PCoIP Zero Clients and PCoIP Remote Workstation Cards?
1) Identify the certificates used for IEEE 802.1x network authentication in your organization 2) Ensure that the certificates are properly formatted Certificates must be in .PEM format and less than 6 KB Both a client certificate and a server root CA …
Displays
After completing this unit, you’ll be able to: Understand the different display configurations. Understand the supported resolutions 20 mins With PCoIP, you can configure several display settings as described below.   Display Resolutions PCoIP supports …
HP Anyware PCoIP Remote Workstation Cards for Remote Workstation High-level Overview
PCoIP High-Performance Remote Workstations Provides a high-level overview and benefits of remote workstations using PCoIP host cards. Duration: 2 min, 27 seconds Pre-requisites: None … HP Anyware PCoIP Remote Workstation Cards for Remote Workstation …
Is it possible to disable the serial port on my Samsung PCoIP Zero Client monitor?
Scenario: Some PCoIP zero clients (i.e. Samsung PCoIP Zero Client monitors) come equipped with a serial port. The units are designed with a built in USB hub feeding both another USB connector and a serial connector. In a PCoIP session, the VM picks up the …
How do I set up Location Based Printing with VMware Horizon View on a PCoIP Zero Client?
Note: For current information regarding location based printing, please see the VMware documentation. (e.g.  http://pubs.vmware.com/view-52/topic/com.vmware.view.administration.doc/GUID-1EB46B6D-EBF7-499E-9AE1-D8253C9FB241.html .) VMware Horizon View 7 …
How do I change the image quality properties of a PCoIP Remote Workstation Card?
Review the below table to understand where to change the image quality properties in a remote workstation environment. This information applies to sessions between PCoIP Zero Clients and a PCoIP Remote Workstation Card (i.e. host card). If you are using a …